Hello,
This is the series bringing DMA support to RZN1 platforms.
Other series follow with eg. UART and RTC support as well.
There is no other conflicting dependency with the other series, so this
series can now entirely be merged in the dmaengine tree I believe.
Cheers,
Miquèl
Changes in v11:
* Renamed two defines.
* Changed the way the bitmap is declared.
* Updated the cover letter: this series can now go in through the
dmaengine tree.
Changes in v10:
* Collected more tags.
* Dropped the mutex from the dmamux driver.
* Added missing includes in the dmamux driver.
* Replaced set_bit() by test_and_set_bit() in order to check if the chan
is already used or not in the dmamux driver.
* Corrected the misuse of the set_bit() macro in the dmamux driver.
Changes in v9:
* Collected more tags.
* Changed a u32 into a regular bitmap and used the bitmap API.
* Reordered two function calls to save one extra line.
* Added a define to avoid a magic value.
Changes in v8:
* Collected more tags.
* Moved the Makefile line adding the dmamux driver to the bottom of the
file.
* Reversed the logic in a ternary operation as suggested by Andy.
* Changed a bit the naming of a #define as suggested by Andy.
Changes in v7:
* This time, really added Stephen's Acks (sorry for the error).
* Moved an error check to get rid of one mutex_unlock/lock call as
suggested by Ilpo.
* Split the patch adding the dmamux driver as advised by Vinod. One
patch introduces the dmamux driver, the other populates the children
of the system controller. As the original patch got acked by Stephen
Boyd, I moved his tag to the patch touching the clock controller only.
Changes in v6:
* Added Stephen's acks.
* Fixed an extra newline added in the middle of nowhere.
* Rebased on top of v5.18-rc1.
Changes in v5:
* Used gotos in rzn1_dmamux_route_allocate().
* Changed the prefix to "dmaengine:".
* Dropped the partial transfers fix.
* Added Rob's acks.
Changes in v4:
* Freed "map" in the error path of the dmamux driver.
* Improved a bit the style as requested by Prabhakar.
* Dropped a __maybe_unused.
* Reorder the includes.
* Added a dependency on ARCH_RZN1.
* Added Rob's Ack.
* Added a reg property to the dmamux binding file.
* Referenced the dmamux binding from the system controller file.
* Called of_platform_populate from the end of the system controller
(clock) driver probe in order to probe the dmamux if it was
populated.
* Added DMA properties to all the relevant UARTs.
Changes in v3:
* Added Reviewed-by tags.
* Exported the set_dmamux* symbol properly.
* Dropped a useless check in the probe and moved the sysctrl_priv
assignation to the end of the probe.
* Renamed the dmamux driver
* Added a couple of missing MODULE_ macros in the dmamux driver.
* Decided to use a regular platform init call instead of the
arch_initcall() initially proposed.
* s/%d/%u/ in printk's when appropriate.
* Used a hardcoded value instead of dmamux->dmac_requests when
appropriate.
* Changed the variable name "master" to "dmac_idx" to be more
descriptive.
* Dropped most of the of_* calls in favor of #define's.
* Fixed a typo.
* Exported two symbols from 8250_dma.c.
Changes in v2:
* Clarified that the 'fix' regarding non aligned reads would only apply
to the DEV_TO_MEM case.
* Fix the DMA controller compatible string (copy-paste error).
* s/syscon/sysctrl/ as advised by Geert.
* Disabled irqs when taking the spinlock from the clocks driver.
* Moved the DMAMUX offset inside the driver.
* Removed extra commas.
* Improved the style as suggested by Andy.
* Removed a dupplicated check against the device node presence.
* Reduced the number of lines of code by using dev_err_probe().
* Created a Kconfig symbol for DMAMUX to fix the two robot reports
received and be sure there was no useless overhead with other
platforms.
* Exported the serial8250_{tx,rx}_dma() symbols.
Miquel Raynal (9):
dt-bindings: dmaengine: Introduce RZN1 dmamux bindings
dt-bindings: clock: r9a06g032-sysctrl: Reference the DMAMUX subnode
dt-bindings: dmaengine: Introduce RZN1 DMA compatible
soc: renesas: rzn1-sysc: Export function to set dmamux
dmaengine: dw: dmamux: Introduce RZN1 DMA router support
clk: renesas: r9a06g032: Probe possible children
dmaengine: dw: Add RZN1 compatible
ARM: dts: r9a06g032: Add the two DMA nodes
ARM: dts: r9a06g032: Describe the DMA router
.../clock/renesas,r9a06g032-sysctrl.yaml | 11 ++
.../bindings/dma/renesas,rzn1-dmamux.yaml | 51 ++++++
.../bindings/dma/snps,dma-spear1340.yaml | 8 +-
MAINTAINERS | 1 +
arch/arm/boot/dts/r9a06g032.dtsi | 40 +++++
drivers/clk/renesas/r9a06g032-clocks.c | 36 +++-
drivers/dma/dw/Kconfig | 9 +
drivers/dma/dw/Makefile | 2 +
drivers/dma/dw/platform.c | 1 +
drivers/dma/dw/rzn1-dmamux.c | 155 ++++++++++++++++++
include/linux/soc/renesas/r9a06g032-sysctrl.h | 11 ++
11 files changed, 323 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
create mode 100644 drivers/dma/dw/rzn1-dmamux.c
create mode 100644 include/linux/soc/renesas/r9a06g032-sysctrl.h
--
2.27.0
