Re: [PATCH 16/25] dmaengine: dw-edma: Simplify the DebugFS context CSRs init procedure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 24, 2022 at 04:48:27AM +0300, Serge Semin wrote:
> DW eDMA v4.70a and older have the read and write channels context CSRs
> indirectly accessible. It means the CSRs like Channel Control, Xfer size,
> SAR, DAR and LLP address are accessed over at a fixed MMIO address, but
> their reference to the corresponding channel is determined by the Viewport
> CSR. In order to have a coherent access to these registers the CSR IOs are
> supposed to be protected with a spin-lock. DW eDMA v4.80a and newer
> normally have unrolled Read/Write channel context registers. That is all
> CSRs denoted before are directly mapped in the controller MMIO space.
> 
> Since both normal and viewport-based registers are exposed via the DebugFS
> nodes, the original code author decided to implement an algorithm based on
> the unrolled CSRs mapping with the viewport addresses recalculation if
> it's required. The problem is that such implementation turned to be first
> unscalable (supports a platform with only single eDMA available since a
> base address statically preserved) and second needlessly overcomplicated
> (it loops over all Rd/Wr context addresses and re-calculates the viewport
> base address on each DebugFS node access). The algorithm can be greatly
> simplified just by adding the channel ID and it's direction fields in the
> eDMA DebugFS node descriptor. These new parameters can be used to find a
> CSR offset within the corresponding channel registers space. The DW eDMA
> DebugFS node getter afterwards will also use them in order to activate the
> respective context CSRs viewport before reading data from the specified
> register. In case of the unrolled version of the CSRs mapping there won't
> be any spin-lock taken/released, no viewport activation as before this
> modification.
> 
> Note this modification fixes the REGISTER() macros using an externally
> defined local variable. The same problem with the rest of the macro will
> be fixed in the next commit.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 84 +++++++++++-------------
>  1 file changed, 38 insertions(+), 46 deletions(-)
> 
> diff --git a/drivers/dma/dw-edma/dw-edma-v0-debugfs.c b/drivers/dma/dw-edma/dw-edma-v0-debugfs.c
> index 7eb0147912fa..b34a68964232 100644
> --- a/drivers/dma/dw-edma/dw-edma-v0-debugfs.c
> +++ b/drivers/dma/dw-edma/dw-edma-v0-debugfs.c
> @@ -15,9 +15,27 @@
>  
>  #define REGS_ADDR(name) \
>  	((void __iomem *)&regs->name)
> +
> +#define REGS_CH_ADDR(name, _dir, _ch)						\
> +	({									\
> +		struct dw_edma_v0_ch_regs __iomem *__ch_regs;			\
> +										\
> +		if ((dw)->chip->mf == EDMA_MF_EDMA_LEGACY)			\
> +			__ch_regs = &regs->type.legacy.ch;			\
> +		else if (_dir == EDMA_DIR_READ)					\
> +			__ch_regs = &regs->type.unroll.ch[_ch].rd;		\
> +		else								\
> +			__ch_regs = &regs->type.unroll.ch[_ch].wr;		\
> +										\
> +		(void __iomem *)&__ch_regs->name;				\
> +	})
> +
>  #define REGISTER(name) \
>  	{ #name, REGS_ADDR(name) }
>  
> +#define CTX_REGISTER(name, dir, ch) \
> +	{ #name, REGS_CH_ADDR(name, dir, ch), dir, ch }

What is the need of "dir, ch" at the end?

> +
>  #define WR_REGISTER(name) \
>  	{ #name, REGS_ADDR(wr_##name) }
>  #define RD_REGISTER(name) \
> @@ -41,14 +59,11 @@
>  static struct dw_edma				*dw;
>  static struct dw_edma_v0_regs			__iomem *regs;
>  
> -static struct {
> -	void					__iomem *start;
> -	void					__iomem *end;
> -} lim[2][EDMA_V0_MAX_NR_CH];
> -
>  struct dw_edma_debugfs_entry {
>  	const char				*name;
>  	void __iomem				*reg;
> +	enum dw_edma_dir			dir;
> +	u16					ch;
>  };
>  
>  static int dw_edma_debugfs_u32_get(void *data, u64 *val)
> @@ -58,33 +73,16 @@ static int dw_edma_debugfs_u32_get(void *data, u64 *val)
>  
>  	if (dw->chip->mf == EDMA_MF_EDMA_LEGACY &&
>  	    reg >= (void __iomem *)&regs->type.legacy.ch) {
> -		void __iomem *ptr = &regs->type.legacy.ch;
> -		u32 viewport_sel = 0;
>  		unsigned long flags;
> -		u16 ch;
> -
> -		for (ch = 0; ch < dw->wr_ch_cnt; ch++)
> -			if (lim[0][ch].start >= reg && reg < lim[0][ch].end) {
> -				ptr += (reg - lim[0][ch].start);
> -				goto legacy_sel_wr;
> -			}
> -
> -		for (ch = 0; ch < dw->rd_ch_cnt; ch++)
> -			if (lim[1][ch].start >= reg && reg < lim[1][ch].end) {
> -				ptr += (reg - lim[1][ch].start);
> -				goto legacy_sel_rd;
> -			}
> -
> -		return 0;
> -legacy_sel_rd:
> -		viewport_sel = BIT(31);
> -legacy_sel_wr:
> -		viewport_sel |= FIELD_PREP(EDMA_V0_VIEWPORT_MASK, ch);
> +		u32 viewport_sel;
> +
> +		viewport_sel = entry->dir == EDMA_DIR_READ ? BIT(31) : 0;
> +		viewport_sel |= FIELD_PREP(EDMA_V0_VIEWPORT_MASK, entry->ch);
>  
>  		raw_spin_lock_irqsave(&dw->lock, flags);
>  
>  		writel(viewport_sel, &regs->type.legacy.viewport_sel);
> -		*val = readl(ptr);
> +		*val = readl(reg);
>  
>  		raw_spin_unlock_irqrestore(&dw->lock, flags);
>  	} else {
> @@ -114,19 +112,19 @@ static void dw_edma_debugfs_create_x32(const struct dw_edma_debugfs_entry ini[],
>  	}
>  }
>  
> -static void dw_edma_debugfs_regs_ch(struct dw_edma_v0_ch_regs __iomem *regs,
> +static void dw_edma_debugfs_regs_ch(enum dw_edma_dir edma_dir, u16 ch,
>  				    struct dentry *dir)

Using "dir" for directory would be confusing since it could also refer
direction. I'd suggest to use "dentry".

Thanks,
Mani

>  {
> -	const struct dw_edma_debugfs_entry debugfs_regs[] = {
> -		REGISTER(ch_control1),
> -		REGISTER(ch_control2),
> -		REGISTER(transfer_size),
> -		REGISTER(sar.lsb),
> -		REGISTER(sar.msb),
> -		REGISTER(dar.lsb),
> -		REGISTER(dar.msb),
> -		REGISTER(llp.lsb),
> -		REGISTER(llp.msb),
> +	struct dw_edma_debugfs_entry debugfs_regs[] = {
> +		CTX_REGISTER(ch_control1, edma_dir, ch),
> +		CTX_REGISTER(ch_control2, edma_dir, ch),
> +		CTX_REGISTER(transfer_size, edma_dir, ch),
> +		CTX_REGISTER(sar.lsb, edma_dir, ch),
> +		CTX_REGISTER(sar.msb, edma_dir, ch),
> +		CTX_REGISTER(dar.lsb, edma_dir, ch),
> +		CTX_REGISTER(dar.msb, edma_dir, ch),
> +		CTX_REGISTER(llp.lsb, edma_dir, ch),
> +		CTX_REGISTER(llp.msb, edma_dir, ch),
>  	};
>  	int nr_entries;
>  
> @@ -191,10 +189,7 @@ static void dw_edma_debugfs_regs_wr(struct dentry *dir)
>  
>  		ch_dir = debugfs_create_dir(name, regs_dir);
>  
> -		dw_edma_debugfs_regs_ch(&regs->type.unroll.ch[i].wr, ch_dir);
> -
> -		lim[0][i].start = &regs->type.unroll.ch[i].wr;
> -		lim[0][i].end = &regs->type.unroll.ch[i].padding_1[0];
> +		dw_edma_debugfs_regs_ch(EDMA_DIR_WRITE, i, ch_dir);
>  	}
>  }
>  
> @@ -256,10 +251,7 @@ static void dw_edma_debugfs_regs_rd(struct dentry *dir)
>  
>  		ch_dir = debugfs_create_dir(name, regs_dir);
>  
> -		dw_edma_debugfs_regs_ch(&regs->type.unroll.ch[i].rd, ch_dir);
> -
> -		lim[1][i].start = &regs->type.unroll.ch[i].rd;
> -		lim[1][i].end = &regs->type.unroll.ch[i].padding_2[0];
> +		dw_edma_debugfs_regs_ch(EDMA_DIR_READ, i, ch_dir);
>  	}
>  }
>  
> -- 
> 2.35.1
> 



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux