get_pdm_clk() calculates the PDM clock based on the quality setting, but really the PDM clock is independent of the quality, it's always rate * 4 * micfil->osr. Just drop the function and do the calculation in the caller. Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- sound/soc/fsl/fsl_micfil.c | 38 +------------------------------------- 1 file changed, 1 insertion(+), 37 deletions(-) diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c index 48054b9bd4bb2..8dadb824a94ff 100644 --- a/sound/soc/fsl/fsl_micfil.c +++ b/sound/soc/fsl/fsl_micfil.c @@ -110,42 +110,6 @@ static const struct snd_kcontrol_new fsl_micfil_snd_controls[] = { snd_soc_get_enum_double, snd_soc_put_enum_double), }; -static inline int get_pdm_clk(struct fsl_micfil *micfil, - unsigned int rate) -{ - u32 ctrl2_reg; - int qsel; - int bclk; - int osr = MICFIL_OSR_DEFAULT; - - regmap_read(micfil->regmap, REG_MICFIL_CTRL2, &ctrl2_reg); - qsel = FIELD_GET(MICFIL_CTRL2_QSEL, ctrl2_reg); - - switch (qsel) { - case MICFIL_QSEL_HIGH_QUALITY: - bclk = rate * 8 * osr / 2; /* kfactor = 0.5 */ - break; - case MICFIL_QSEL_MEDIUM_QUALITY: - case MICFIL_QSEL_VLOW0_QUALITY: - bclk = rate * 4 * osr * 1; /* kfactor = 1 */ - break; - case MICFIL_QSEL_LOW_QUALITY: - case MICFIL_QSEL_VLOW1_QUALITY: - bclk = rate * 2 * osr * 2; /* kfactor = 2 */ - break; - case MICFIL_QSEL_VLOW2_QUALITY: - bclk = rate * osr * 4; /* kfactor = 4 */ - break; - default: - dev_err(&micfil->pdev->dev, - "Please make sure you select a valid quality.\n"); - bclk = -1; - break; - } - - return bclk; -} - static inline int get_clk_div(struct fsl_micfil *micfil, unsigned int rate) { @@ -154,7 +118,7 @@ static inline int get_clk_div(struct fsl_micfil *micfil, mclk_rate = clk_get_rate(micfil->mclk); - clk_div = mclk_rate / (get_pdm_clk(micfil, rate) * 2); + clk_div = mclk_rate / (rate * micfil->osr * 8); return clk_div; } -- 2.30.2