Re: [PATCH v2] dma: xilinx: check the return value of dma_set_mask() in zynqmp_dma_probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 05 Mar 2022 01:31:20 -0800, Jia-Ju Bai wrote:
> The function dma_set_mask() in zynqmp_dma_probe() can fail, so its
> return value should be checked.
> 
> Fixes: b0cc417c1637 ("dmaengine: Add Xilinx zynqmp dma engine driver support")
> Reported-by: TOTE Robot <oslab@xxxxxxxxxxxxxxx>
> Signed-off-by: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>

Reviewed-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>

> ---
> v2:
> * Print an error message and forward the return value of dma_set_mask().
>   Thank Michael for good advice.
> 
> ---
>  drivers/dma/xilinx/zynqmp_dma.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
> index 7aa63b652027..2791e9c6a4ea 100644
> --- a/drivers/dma/xilinx/zynqmp_dma.c
> +++ b/drivers/dma/xilinx/zynqmp_dma.c
> @@ -1050,7 +1050,10 @@ static int zynqmp_dma_probe(struct platform_device *pdev)
>  	zdev->dev = &pdev->dev;
>  	INIT_LIST_HEAD(&zdev->common.channels);
>  
> -	dma_set_mask(&pdev->dev, DMA_BIT_MASK(44));
> +	ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(44));
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret, "No usable DMA available\n");
> +
>  	dma_cap_set(DMA_MEMCPY, zdev->common.cap_mask);
>  
>  	p = &zdev->common;
> -- 
> 2.17.1
> 
> 



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux