Convert the MediaTek UART APDMA Controller binding to DT schema. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> --- .../bindings/dma/mediatek,uart-dma.yaml | 112 ++++++++++++++++++ .../bindings/dma/mtk-uart-apdma.txt | 56 --------- 2 files changed, 112 insertions(+), 56 deletions(-) create mode 100644 Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml delete mode 100644 Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt diff --git a/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml new file mode 100644 index 000000000000..4583c8f535b2 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/mediatek,uart-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek UART APDMA controller + +maintainers: + - Long Cheng <long.cheng@xxxxxxxxxxxx> + +description: | + The MediaTek UART APDMA controller provides DMA capabilities + for the UART peripheral bus. + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2712-uart-dma + - mediatek,mt8516-uart-dma + - const: mediatek,mt6577-uart-dma + - enum: + - mediatek,mt6577-uart-dma + + reg: + minItems: 1 + maxItems: 16 + + interrupts: + description: | + TX, RX interrupt lines for each UART APDMA channel + minItems: 1 + maxItems: 32 + + clocks: + description: Must contain one entry for the APDMA main clock + maxItems: 1 + + clock-names: + const: apdma + + "#dma-cells": + const: 1 + description: | + The first cell specifies the UART APDMA channel number + + dma-requests: + description: | + Number of virtual channels of the UART APDMA controller + maximum: 16 + + mediatek,dma-33bits: + type: boolean + description: Enable 33-bits UART APDMA support + +required: + - compatible + - reg + - interrupts + - "#dma-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt2712-clk.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + apdma: dma-controller@11000400 { + compatible = "mediatek,mt2712-uart-dma", + "mediatek,mt6577-uart-dma"; + reg = <0 0x11000400 0 0x80>, + <0 0x11000480 0 0x80>, + <0 0x11000500 0 0x80>, + <0 0x11000580 0 0x80>, + <0 0x11000600 0 0x80>, + <0 0x11000680 0 0x80>, + <0 0x11000700 0 0x80>, + <0 0x11000780 0 0x80>, + <0 0x11000800 0 0x80>, + <0 0x11000880 0 0x80>, + <0 0x11000900 0 0x80>, + <0 0x11000980 0 0x80>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>; + dma-requests = <12>; + clocks = <&pericfg CLK_PERI_AP_DMA>; + clock-names = "apdma"; + mediatek,dma-33bits; + #dma-cells = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt deleted file mode 100644 index fef9c1eeb264..000000000000 --- a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Mediatek UART APDMA Controller - -Required properties: -- compatible should contain: - * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA - * "mediatek,mt6577-uart-dma" for MT6577 and all of the above - * "mediatek,mt8516-uart-dma", "mediatek,mt6577" for MT8516 SoC - -- reg: The base address of the APDMA register bank. - -- interrupts: A single interrupt specifier. - One interrupt per dma-requests, or 8 if no dma-requests property is present - -- dma-requests: The number of DMA channels - -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: The APDMA clock for register accesses - -- mediatek,dma-33bits: Present if the DMA requires support - -Examples: - - apdma: dma-controller@11000400 { - compatible = "mediatek,mt2712-uart-dma", - "mediatek,mt6577-uart-dma"; - reg = <0 0x11000400 0 0x80>, - <0 0x11000480 0 0x80>, - <0 0x11000500 0 0x80>, - <0 0x11000580 0 0x80>, - <0 0x11000600 0 0x80>, - <0 0x11000680 0 0x80>, - <0 0x11000700 0 0x80>, - <0 0x11000780 0 0x80>, - <0 0x11000800 0 0x80>, - <0 0x11000880 0 0x80>, - <0 0x11000900 0 0x80>, - <0 0x11000980 0 0x80>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>; - dma-requests = <12>; - clocks = <&pericfg CLK_PERI_AP_DMA>; - clock-names = "apdma"; - mediatek,dma-33bits; - #dma-cells = <1>; - }; -- 2.33.1
