Re: [PATCH] dmaengine: ti: Fix runtime PM imbalance on error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----原始邮件-----
> 发件人: "Péter Ujfalusi" <peter.ujfalusi@xxxxxxxxx>
> 发送时间: 2022-01-22 16:09:53 (星期六)
> 收件人: "Yongzhi Liu" <lyz_cs@xxxxxxxxxx>, vkoul@xxxxxxxxxx
> 抄送: dmaengine@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx
> 主题: Re: [PATCH] dmaengine: ti: Fix runtime PM imbalance on error
> 
> 
> 
> On 1/16/22 13:31, Yongzhi Liu wrote:
> > pm_runtime_get_sync() increments the runtime PM usage counter even
> > when it returns an error code, thus a matching decrement is needed on
> > the error handling path to keep the counter balanced.
> 
> The patch is correct, however the commit message is a bit incorrect.
> 
> We are not adding any visible matching decrement, we are switching to
> pm_runtime_resume_and_get() which only increments the usage counter if
> pm_runtime_resume() is successful.
> Granted internally it does a pm_runtime_put_noidle() if resume call fails.
> 
> Switch to pm_runtime_resume_and_get() to keep the device's use caunt
> balanced?
> 

Thanks for your reply. I agree with your change and rewrite the commit message as follows.

[why]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, however pm_runtime_resume_and_get() 
only increments the usage counter if pm_runtime_resume() is successful,
which granted internally does a pm_runtime_put_noidle() if resume call fails.

[how]
Fix this by switching to pm_runtime_resume_and_get() to keep the device's use count
balanced.


> > 
> > Signed-off-by: Yongzhi Liu <lyz_cs@xxxxxxxxxx>
> > ---
> >  drivers/dma/ti/edma.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
> > index 08e47f4..a73f779 100644
> > --- a/drivers/dma/ti/edma.c
> > +++ b/drivers/dma/ti/edma.c
> > @@ -2398,9 +2398,9 @@ static int edma_probe(struct platform_device *pdev)
> >  	platform_set_drvdata(pdev, ecc);
> >  
> >  	pm_runtime_enable(dev);
> > -	ret = pm_runtime_get_sync(dev);
> > +	ret = pm_runtime_resume_and_get(dev);
> >  	if (ret < 0) {
> > -		dev_err(dev, "pm_runtime_get_sync() failed\n");
> > +		dev_err(dev, "pm_runtime_resume_and_get() failed\n");
> >  		pm_runtime_disable(dev);
> >  		return ret;
> >  	}
> 
> -- 
> Péter




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux