[PATCH v2 04/11] mmc: bcm2835: stop setting chan_config->slave_id

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Arnd Bergmann <arnd@xxxxxxxx>

The field is not interpreted by the DMA engine driver, as all the data
is passed from devicetree instead. Remove the assignment so the field
can eventually be deleted.

Reviewed-by: Nicolas Saenz Julienne <nsaenz@xxxxxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
 drivers/mmc/host/bcm2835.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
index 8c2361e66277..463b707d9e99 100644
--- a/drivers/mmc/host/bcm2835.c
+++ b/drivers/mmc/host/bcm2835.c
@@ -1293,14 +1293,12 @@ static int bcm2835_add_host(struct bcm2835_host *host)
 
 		host->dma_cfg_tx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 		host->dma_cfg_tx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-		host->dma_cfg_tx.slave_id = 13;		/* DREQ channel */
 		host->dma_cfg_tx.direction = DMA_MEM_TO_DEV;
 		host->dma_cfg_tx.src_addr = 0;
 		host->dma_cfg_tx.dst_addr = host->phys_addr + SDDATA;
 
 		host->dma_cfg_rx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 		host->dma_cfg_rx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-		host->dma_cfg_rx.slave_id = 13;		/* DREQ channel */
 		host->dma_cfg_rx.direction = DMA_DEV_TO_MEM;
 		host->dma_cfg_rx.src_addr = host->phys_addr + SDDATA;
 		host->dma_cfg_rx.dst_addr = 0;
-- 
2.29.2




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux