Add halt interrupt support. Given that the misc interrupt handler already
check halt state, the driver just need to run the halt handling code when
receiving the halt interrupt.
Signed-off-by: Dave Jiang <dave.jiang@xxxxxxxxx>
---
drivers/dma/idxd/irq.c | 5 +++++
drivers/dma/idxd/registers.h | 1 +
2 files changed, 6 insertions(+)
diff --git a/drivers/dma/idxd/irq.c b/drivers/dma/idxd/irq.c
index ca88fa7a328e..3261ea247e83 100644
--- a/drivers/dma/idxd/irq.c
+++ b/drivers/dma/idxd/irq.c
@@ -63,6 +63,9 @@ static int process_misc_interrupts(struct idxd_device *idxd, u32 cause)
int i;
bool err = false;
+ if (cause & IDXD_INTC_HALT_STATE)
+ goto halt;
+
if (cause & IDXD_INTC_ERR) {
spin_lock(&idxd->dev_lock);
for (i = 0; i < 4; i++)
@@ -121,6 +124,7 @@ static int process_misc_interrupts(struct idxd_device *idxd, u32 cause)
if (!err)
return 0;
+halt:
gensts.bits = ioread32(idxd->reg_base + IDXD_GENSTATS_OFFSET);
if (gensts.state == IDXD_DEVICE_STATE_HALT) {
idxd->state = IDXD_DEV_HALTED;
@@ -134,6 +138,7 @@ static int process_misc_interrupts(struct idxd_device *idxd, u32 cause)
queue_work(idxd->wq, &idxd->work);
} else {
spin_lock(&idxd->dev_lock);
+ idxd->state = IDXD_DEV_HALTED;
idxd_wqs_quiesce(idxd);
idxd_wqs_unmap_portal(idxd);
idxd_device_clear_state(idxd);
diff --git a/drivers/dma/idxd/registers.h b/drivers/dma/idxd/registers.h
index ffc7550a77ee..97ffb06de9b0 100644
--- a/drivers/dma/idxd/registers.h
+++ b/drivers/dma/idxd/registers.h
@@ -158,6 +158,7 @@ enum idxd_device_reset_type {
#define IDXD_INTC_CMD 0x02
#define IDXD_INTC_OCCUPY 0x04
#define IDXD_INTC_PERFMON_OVFL 0x08
+#define IDXD_INTC_HALT_STATE 0x10
#define IDXD_CMD_OFFSET 0xa0
union idxd_command_reg {
