Am Mittwoch, dem 07.04.2021 um 23:30 +0800 schrieb Robin Gong: > Change to XCH mode even in dma mode, please refer to the below > errata: > https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf > > Signed-off-by: Robin Gong <yibin.gong@xxxxxxx> > Acked-by: Mark Brown <broonie@xxxxxxxxxx> Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> > --- > drivers/spi/spi-imx.c | 10 +++------- > 1 file changed, 3 insertions(+), 7 deletions(-) > > diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c > index 4fe767a..cf235b9 100644 > --- a/drivers/spi/spi-imx.c > +++ b/drivers/spi/spi-imx.c > @@ -593,8 +593,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, > ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk); > spi_imx->spi_bus_clk = clk; > > - if (spi_imx->usedma) > - ctrl |= MX51_ECSPI_CTRL_SMC; > + /* ERR009165: work in XHC mode as PIO */ > + ctrl &= ~MX51_ECSPI_CTRL_SMC; > > writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); > > @@ -625,7 +625,7 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx) > * and enable DMA request. > */ > writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) | > - MX51_ECSPI_DMA_TX_WML(spi_imx->wml) | > + MX51_ECSPI_DMA_TX_WML(0) | > MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) | > MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN | > MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA); > @@ -1234,10 +1234,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, > { > int ret; > > - /* use pio mode for i.mx6dl chip TKT238285 */ > - if (of_machine_is_compatible("fsl,imx6dl")) > - return 0; > - > spi_imx->wml = spi_imx->devtype_data->fifo_size / 2; > > /* Prepare for TX DMA: */
