Hi Laurent,
On 4/30/21 8:36 AM, Laurent Pinchart wrote:
Hi Quanyang,
Thank you for the patch.
On Thu, Apr 29, 2021 at 02:58:21PM +0800, quanyang.wang@xxxxxxxxxxxxx wrote:
From: Quanyang Wang <quanyang.wang@xxxxxxxxxxxxx>
In some scenarios (kdump), dpdma hardware irqs has been enabled when
calling request_irq in probe function, and then the dpdma irq handler
xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at
this moment xdev->chan[i] hasn't been initialized. So let's call the
request_irq after initializing dma channels to avoid kdump kernel
crash as below:
[ 3.696128] Unable to handle kernel NULL pointer dereference at virtual address 000000000000012c
[ 3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
[ 3.704900] Mem abort info:
[ 3.704902] ESR = 0x96000005
[ 3.704905] EC = 0x25: DABT (current EL), IL = 32 bits
[ 3.704907] SET = 0, FnV = 0
[ 3.704912] EA = 0, S1PTW = 0
[ 3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator
[ 3.715585] Data abort info:
[ 3.715587] ISV = 0, ISS = 0x00000005
[ 3.715589] CM = 0, WnR = 0
[ 3.715592] [000000000000012c] user address but active_mm is swapper
[ 3.715596] Internal error: Oops: 96000005 [#1] SMP
[ 3.715599] Modules linked in:
[ 3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-12170-g60894882155f-dirty #77
[ 3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
[ 3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--)
[ 3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560
[ 3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560
[ 3.798089] sp : ffffffc01186bdf0
[ 3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28
[ 3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080
[ 3.811996] x25: 0000000008000408 x24: 0000000000000003
[ 3.817300] x23: ffffffc01186be70 x22: ffffffc011291740
[ 3.822604] x21: 0000000000000000 x20: 0000000008000408
[ 3.827908] x19: 0000000000000000 x18: 0000000000000010
[ 3.833212] x17: 0000000000000000 x16: 0000000000000000
[ 3.838516] x15: 0000000000000000 x14: ffffffc011291740
[ 3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d
[ 3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48
[ 3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268
[ 3.859732] x7 : 0000000000000000 x6 : ffffffc011836000
[ 3.865036] x5 : 0000000000000003 x4 : 0000000000000000
[ 3.870340] x3 : 0000000000000001 x2 : 0000000000000000
[ 3.875644] x1 : 0000000000000000 x0 : 000000000000012c
[ 3.880948] Call trace:
[ 3.883382] xilinx_dpdma_irq_handler+0x418/0x560
[ 3.888079] __handle_irq_event_percpu+0x5c/0x178
[ 3.892774] handle_irq_event_percpu+0x34/0x98
[ 3.897210] handle_irq_event+0x44/0xb8
[ 3.901030] handle_fasteoi_irq+0xd0/0x190
[ 3.905117] generic_handle_irq+0x30/0x48
[ 3.909111] __handle_domain_irq+0x64/0xc0
[ 3.913192] gic_handle_irq+0x78/0xa0
[ 3.916846] el1_irq+0xc4/0x180
[ 3.919982] cpuidle_enter_state+0x134/0x2f8
[ 3.924243] cpuidle_enter+0x38/0x50
[ 3.927810] call_cpuidle+0x1c/0x40
[ 3.931290] do_idle+0x20c/0x270
[ 3.934502] cpu_startup_entry+0x28/0x58
[ 3.938410] rest_init+0xbc/0xcc
[ 3.941631] arch_call_rest_init+0x10/0x1c
[ 3.945718] start_kernel+0x51c/0x558
Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver")
Signed-off-by: Quanyang Wang <quanyang.wang@xxxxxxxxxxxxx>
---
drivers/dma/xilinx/xilinx_dpdma.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c
index 70b29bd079c9..0b599402c53f 100644
--- a/drivers/dma/xilinx/xilinx_dpdma.c
+++ b/drivers/dma/xilinx/xilinx_dpdma.c
@@ -1622,19 +1622,6 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
if (IS_ERR(xdev->reg))
return PTR_ERR(xdev->reg);
- xdev->irq = platform_get_irq(pdev, 0);
- if (xdev->irq < 0) {
- dev_err(xdev->dev, "failed to get platform irq\n");
- return xdev->irq;
- }
-
- ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
- dev_name(xdev->dev), xdev);
- if (ret) {
- dev_err(xdev->dev, "failed to request IRQ\n");
- return ret;
- }
-
ddev = &xdev->common;
ddev->dev = &pdev->dev;
@@ -1688,6 +1675,19 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
goto error_of_dma;
}
+ xdev->irq = platform_get_irq(pdev, 0);
+ if (xdev->irq < 0) {
+ dev_err(xdev->dev, "failed to get platform irq\n");
As reported by the kbuild bot, ret isn't initialized here.
I will fix this in V2.
+ goto error_irq;
+ }
This part could stay where it was, just after
devm_platform_ioremap_resource().
OK，I will move it back.
+
+ ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
+ dev_name(xdev->dev), xdev);
+ if (ret) {
+ dev_err(xdev->dev, "failed to request IRQ\n");
+ goto error_irq;
+ }
Ideally we should reset the device before requesting the IRQ, to ensure
we start in a consistent state. There doesn't seem to be any global
reset unfortunately. Shouldn't we at least disable interrupts ? It may
be a bit pointless though as we reenable them right below, so I suppose
this would be OK.
Yes, we should start in a consistent and clean state. I will disable
interrupts
and clean up registers state in V2.
+
xilinx_dpdma_enable_irq(xdev);
xilinx_dpdma_debugfs_init(xdev);
@@ -1696,6 +1696,8 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
return 0;
+error_irq:
+ of_dma_controller_free(pdev->dev.of_node);
Why not free_irq() ? This change isn't described in the commit message.
I will add it in V2.
Thanks,
Quanyang
error_of_dma:
dma_async_device_unregister(ddev);
error_dma_async:
@@ -1704,8 +1706,6 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
for (i = 0; i < ARRAY_SIZE(xdev->chan); i++)
xilinx_dpdma_chan_remove(xdev->chan[i]);
- free_irq(xdev->irq, xdev);
-
return ret;
}
