The Xilinx dmaengine driver uses a tasklet to process completed
descriptors and execute their callbacks.
Currently consumers of the DMA channel have to no method of synchronization
against this tasklet when using the Xilinx dmaengine drivers. This can lead
to race conditions when the consumer frees resources that are accessed in
the callback before the tasklet has finished running.
It is not enough to just call dmaengine_terminal_all() since on a
multi-processor system the tasklet can run concurrently to it and might
call the callback after dmaengine_terminate_all() has already finished.
To mitigate this issue implement the synchronize() callback for the driver,
which will wait until the tasklet has finished.
Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
---
drivers/dma/xilinx/xilinx_dma.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 3aded7861fef..75c0b8e904e5 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -2453,6 +2453,13 @@ static int xilinx_dma_terminate_all(struct dma_chan *dchan)
return 0;
}
+static void xilinx_dma_synchronize(struct dma_chan *dchan)
+{
+ struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+
+ tasklet_kill(&chan->tasklet);
+}
+
/**
* xilinx_dma_channel_set_config - Configure VDMA channel
* Run-time configuration for Axi VDMA, supports:
@@ -3074,6 +3081,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
xdev->common.device_free_chan_resources =
xilinx_dma_free_chan_resources;
xdev->common.device_terminate_all = xilinx_dma_terminate_all;
+ xdev->common.device_synchronize = xilinx_dma_synchronize;
xdev->common.device_tx_status = xilinx_dma_tx_status;
xdev->common.device_issue_pending = xilinx_dma_issue_pending;
if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
--
2.20.1
