[PATCH v3 08/15] arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and
SoC-part.  Up to a point that N5X uses the same DTSI as Agilex.  From
the Linux kernel point of view these are flavors of the same
architecture so there is no need for three top-level arm64
architectures.  Simplify this by merging all three architectures into
ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries.

The side effect is that the INTEL_STRATIX10_SERVICE will now be
available for both 32-bit and 64-bit Intel SoCFPGA, even though it is
used only for 64-bit.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
---
 arch/arm64/Kconfig.platforms       | 21 ++++-----------------
 arch/arm64/boot/dts/intel/Makefile |  6 +++---
 arch/arm64/configs/defconfig       |  3 +--
 drivers/clk/Makefile               |  2 --
 drivers/clk/socfpga/Kconfig        |  4 ++--
 drivers/firmware/Kconfig           |  2 +-
 drivers/fpga/Kconfig               |  2 +-
 drivers/reset/Kconfig              |  2 +-
 8 files changed, 13 insertions(+), 29 deletions(-)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index ecab67a1afb8..ce50dd129eec 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -8,16 +8,6 @@ config ARCH_ACTIONS
 	help
 	  This enables support for the Actions Semiconductor S900 SoC family.
 
-config ARCH_AGILEX
-	bool "Intel's Agilex SoCFPGA Family"
-	help
-	  This enables support for Intel's Agilex SoCFPGA Family.
-
-config ARCH_N5X
-	bool "Intel's eASIC N5X SoCFPGA Family"
-	help
-	  This enables support for Intel's eASIC N5X SoCFPGA Family.
-
 config ARCH_SUNXI
 	bool "Allwinner sunxi 64-bit SoC Family"
 	select ARCH_HAS_RESET_CONTROLLER
@@ -254,14 +244,11 @@ config ARCH_SEATTLE
 	help
 	  This enables support for AMD Seattle SOC Family
 
-config ARCH_STRATIX10
-	bool "Altera's Stratix 10 SoCFPGA Family"
-	select ARCH_INTEL_SOCFPGA
-	help
-	  This enables support for Altera's Stratix 10 SoCFPGA Family.
-
 config ARCH_INTEL_SOCFPGA
-	bool
+	bool "Intel's SoCFPGA ARMv8 Families"
+	help
+	  This enables support for Intel's SoCFPGA ARMv8 families:
+	  Stratix 10 (ex. Altera), Agilex and eASIC N5X.
 
 config ARCH_SYNQUACER
 	bool "Socionext SynQuacer SoC Family"
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 3a052540605b..0b5477442263 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
-			     socfpga_agilex_socdk_nand.dtb
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_socdk.dtb \
+				socfpga_agilex_socdk_nand.dtb \
+				socfpga_n5x_socdk.dtb
 dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
-dtb-$(CONFIG_ARCH_N5X) += socfpga_n5x_socdk.dtb
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index d612f633b771..cf8a3009b858 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -28,7 +28,6 @@ CONFIG_KALLSYMS_ALL=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
 CONFIG_ARCH_ACTIONS=y
-CONFIG_ARCH_AGILEX=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_BCM2835=y
@@ -50,7 +49,7 @@ CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_S32=y
 CONFIG_ARCH_SEATTLE=y
-CONFIG_ARCH_STRATIX10=y
+CONFIG_ARCH_INTEL_SOCFPGA=y
 CONFIG_ARCH_SYNQUACER=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_SPRD=y
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 1e29e5ad107a..96802294d35a 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -105,8 +105,6 @@ obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
 obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
 obj-$(CONFIG_CLK_SIFIVE)		+= sifive/
 obj-$(CONFIG_ARCH_INTEL_SOCFPGA)	+= socfpga/
-obj-$(CONFIG_ARCH_AGILEX)		+= socfpga/
-obj-$(CONFIG_ARCH_N5X)			+= socfpga/
 obj-$(CONFIG_PLAT_SPEAR)		+= spear/
 obj-y					+= sprd/
 obj-$(CONFIG_ARCH_STI)			+= st/
diff --git a/drivers/clk/socfpga/Kconfig b/drivers/clk/socfpga/Kconfig
index bc102e0f0be0..b6c5b9737174 100644
--- a/drivers/clk/socfpga/Kconfig
+++ b/drivers/clk/socfpga/Kconfig
@@ -2,5 +2,5 @@
 config CLK_INTEL_SOCFPGA64
 	bool
 	# Intel Stratix / Agilex / N5X clock controller support
-	default (ARCH_AGILEX || ARCH_N5X || ARCH_STRATIX10)
-	depends on ARCH_AGILEX || ARCH_N5X || ARCH_STRATIX10
+	default ARM64 && ARCH_INTEL_SOCFPGA
+	depends on ARM64 && ARCH_INTEL_SOCFPGA
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 3f14dffb9669..6a4e882e448d 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -206,7 +206,7 @@ config FW_CFG_SYSFS_CMDLINE
 
 config INTEL_STRATIX10_SERVICE
 	tristate "Intel Stratix10 Service Layer"
-	depends on (ARCH_STRATIX10 || ARCH_AGILEX) && HAVE_ARM_SMCCC
+	depends on ARCH_INTEL_SOCFPGA && HAVE_ARM_SMCCC
 	default n
 	help
 	  Intel Stratix10 service layer runs at privileged exception level,
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 5ff9438b7b46..fd325e9c5ce6 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -60,7 +60,7 @@ config FPGA_MGR_ZYNQ_FPGA
 
 config FPGA_MGR_STRATIX10_SOC
 	tristate "Intel Stratix10 SoC FPGA Manager"
-	depends on (ARCH_STRATIX10 && INTEL_STRATIX10_SERVICE)
+	depends on (ARCH_INTEL_SOCFPGA && INTEL_STRATIX10_SERVICE)
 	help
 	  FPGA manager driver support for the Intel Stratix10 SoC.
 
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 4171c6f76385..b1e8efa16166 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -183,7 +183,7 @@ config RESET_SCMI
 
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST
-	default ARCH_AGILEX || ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARC
+	default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
 	help
 	  This enables a simple reset controller driver for reset lines that
 	  that can be asserted and deasserted by toggling bits in a contiguous,
-- 
2.25.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux