Re: [PATCH v2] dma: qcom: bam_dma: Manage clocks when controlled_remotely is set

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 26-01-21, 16:18, Thara Gopinath wrote:
> When bam dma is "controlled remotely", thus far clocks were not controlled
> from the Linux. In this scenario, Linux was disabling runtime pm in bam dma
> driver and not doing any clock management in suspend/resume hooks.
> 
> With introduction of crypto engine bam dma, the clock is a rpmh resource
> that can be controlled from both Linux and TZ/remote side.  Now bam dma
> clock is getting enabled during probe even though the bam dma can be
> "controlled remotely". But due to clocks not being handled properly,
> bam_suspend generates a unbalanced clk_unprepare warning during system
> suspend.
> 
> To fix the above issue and to enable proper clock-management, this patch
> enables runtim-pm and handles bam dma clocks in suspend/resume hooks if
> the clock node is present irrespective of controlled_remotely property.

Applied after fixing subsystem name, thanks

-- 
~Vinod



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux