Re: [PATCH v2 4/4] dmaengine: rcar-dmac: Add support for R-Car V3U

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 25, 2021 at 03:24:31PM +0100, Geert Uytterhoeven wrote:
> The DMACs (both SYS-DMAC and RT-DMAC) on R-Car V3U differ slightly from
> the DMACs on R-Car Gen2 and other R-Car Gen3 SoCs:
>   1. The per-channel registers are located in a second register block.
>      Add support for mapping the second block, using the appropriate
>      offsets and stride.
>   2. The common Channel Clear Register (DMACHCLR) was replaced by a
>      per-channel register.
>      Update rcar_dmac_chan_clear{,_all}() to handle this.
>      As rcar_dmac_init() needs to clear the status before the individual
>      channels are probed, channel index and base address initialization
>      are moved forward.
> 
> Inspired by a patch in the BSP by Phong Hoang
> <phong.hoang.wz@xxxxxxxxxxx>.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

Apporach looks good, didn't check the gory details. However, it still
works fine with I2C + DMA on V3U, so:

Tested-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux