On 14-12-20, 10:13, Peter Ujfalusi wrote:
> The UDMA and BCDMA can provide higher throughput if the burst_size of the
> channel is changed from it's default (which is 64 bytes) for Ultra-high
> and high capacity channels.
>
> This performance benefit is even more visible when the buffers are aligned
> with the burst_size configuration.
>
> The am654 does not have a way to change the burst size, but it is using
> 64 bytes burst, so increasing the copy_align from 8 bytes to 64 (and
> clients taking that into account) can increase the throughput as well.
>
> Numbers gathered on j721e:
> echo 8000000 > /sys/module/dmatest/parameters/test_buf_size
> echo 2000 > /sys/module/dmatest/parameters/timeout
> echo 50 > /sys/module/dmatest/parameters/iterations
> echo 1 > /sys/module/dmatest/parameters/max_channels
>
> Prior this patch: ~1.3 GB/s
> After this patch: ~1.8 GB/s
> with 1 byte alignment: ~1.7 GB/s
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> ---
> drivers/dma/ti/k3-udma.c | 115 +++++++++++++++++++++++++++++++++++++--
> 1 file changed, 110 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
> index 87157cbae1b8..54e4ccb1b37e 100644
> --- a/drivers/dma/ti/k3-udma.c
> +++ b/drivers/dma/ti/k3-udma.c
> @@ -121,6 +121,11 @@ struct udma_oes_offsets {
> #define UDMA_FLAG_PDMA_ACC32 BIT(0)
> #define UDMA_FLAG_PDMA_BURST BIT(1)
> #define UDMA_FLAG_TDTYPE BIT(2)
> +#define UDMA_FLAG_BURST_SIZE BIT(3)
> +#define UDMA_FLAGS_J7_CLASS (UDMA_FLAG_PDMA_ACC32 | \
> + UDMA_FLAG_PDMA_BURST | \
> + UDMA_FLAG_TDTYPE | \
> + UDMA_FLAG_BURST_SIZE)
>
> struct udma_match_data {
> enum k3_dma_type type;
> @@ -128,6 +133,7 @@ struct udma_match_data {
> bool enable_memcpy_support;
> u32 flags;
> u32 statictr_z_mask;
> + u8 burst_size[3];
> };
>
> struct udma_soc_data {
> @@ -436,6 +442,18 @@ static void k3_configure_chan_coherency(struct dma_chan *chan, u32 asel)
> }
> }
>
> +static u8 udma_get_chan_tpl_index(struct udma_tpl *tpl_map, int chan_id)
> +{
> + int i;
> +
> + for (i = 0; i < tpl_map->levels; i++) {
> + if (chan_id >= tpl_map->start_idx[i])
> + return i;
> + }
Braces seem not required
> +
> + return 0;
> +}
> +
> static void udma_reset_uchan(struct udma_chan *uc)
> {
> memset(&uc->config, 0, sizeof(uc->config));
> @@ -1811,6 +1829,7 @@ static int udma_tisci_m2m_channel_config(struct udma_chan *uc)
> const struct ti_sci_rm_udmap_ops *tisci_ops = tisci_rm->tisci_udmap_ops;
> struct udma_tchan *tchan = uc->tchan;
> struct udma_rchan *rchan = uc->rchan;
> + u8 burst_size = 0;
> int ret = 0;
>
> /* Non synchronized - mem to mem type of transfer */
> @@ -1818,6 +1837,12 @@ static int udma_tisci_m2m_channel_config(struct udma_chan *uc)
> struct ti_sci_msg_rm_udmap_tx_ch_cfg req_tx = { 0 };
> struct ti_sci_msg_rm_udmap_rx_ch_cfg req_rx = { 0 };
>
> + if (ud->match_data->flags & UDMA_FLAG_BURST_SIZE) {
> + u8 tpl = udma_get_chan_tpl_index(&ud->tchan_tpl, tchan->id);
Can we define variable at function start please
> +
> + burst_size = ud->match_data->burst_size[tpl];
> + }
> +
> req_tx.valid_params = TISCI_UDMA_TCHAN_VALID_PARAMS;
> req_tx.nav_id = tisci_rm->tisci_dev_id;
> req_tx.index = tchan->id;
> @@ -1825,6 +1850,10 @@ static int udma_tisci_m2m_channel_config(struct udma_chan *uc)
> req_tx.tx_fetch_size = sizeof(struct cppi5_desc_hdr_t) >> 2;
> req_tx.txcq_qnum = tc_ring;
> req_tx.tx_atype = ud->atype;
> + if (burst_size) {
> + req_tx.valid_params |= TI_SCI_MSG_VALUE_RM_UDMAP_CH_BURST_SIZE_VALID;
> + req_tx.tx_burst_size = burst_size;
> + }
>
> ret = tisci_ops->tx_ch_cfg(tisci_rm->tisci, &req_tx);
> if (ret) {
> @@ -1839,6 +1868,10 @@ static int udma_tisci_m2m_channel_config(struct udma_chan *uc)
> req_rx.rxcq_qnum = tc_ring;
> req_rx.rx_chan_type = TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBRR;
> req_rx.rx_atype = ud->atype;
> + if (burst_size) {
> + req_rx.valid_params |= TI_SCI_MSG_VALUE_RM_UDMAP_CH_BURST_SIZE_VALID;
> + req_rx.rx_burst_size = burst_size;
> + }
>
> ret = tisci_ops->rx_ch_cfg(tisci_rm->tisci, &req_rx);
> if (ret)
> @@ -1854,12 +1887,23 @@ static int bcdma_tisci_m2m_channel_config(struct udma_chan *uc)
> const struct ti_sci_rm_udmap_ops *tisci_ops = tisci_rm->tisci_udmap_ops;
> struct ti_sci_msg_rm_udmap_tx_ch_cfg req_tx = { 0 };
> struct udma_bchan *bchan = uc->bchan;
> + u8 burst_size = 0;
> int ret = 0;
>
> + if (ud->match_data->flags & UDMA_FLAG_BURST_SIZE) {
> + u8 tpl = udma_get_chan_tpl_index(&ud->bchan_tpl, bchan->id);
here as well
> +
> + burst_size = ud->match_data->burst_size[tpl];
> + }
> +
> req_tx.valid_params = TISCI_BCDMA_BCHAN_VALID_PARAMS;
> req_tx.nav_id = tisci_rm->tisci_dev_id;
> req_tx.extended_ch_type = TI_SCI_RM_BCDMA_EXTENDED_CH_TYPE_BCHAN;
> req_tx.index = bchan->id;
> + if (burst_size) {
> + req_tx.valid_params |= TI_SCI_MSG_VALUE_RM_UDMAP_CH_BURST_SIZE_VALID;
> + req_tx.tx_burst_size = burst_size;
> + }
>
> ret = tisci_ops->tx_ch_cfg(tisci_rm->tisci, &req_tx);
> if (ret)
> @@ -4167,6 +4211,11 @@ static struct udma_match_data am654_main_data = {
> .psil_base = 0x1000,
> .enable_memcpy_support = true,
> .statictr_z_mask = GENMASK(11, 0),
> + .burst_size = {
> + TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES, /* Normal Channels */
> + TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES, /* H Channels */
> + 0, /* No UH Channels */
> + },
> };
>
> static struct udma_match_data am654_mcu_data = {
> @@ -4174,38 +4223,63 @@ static struct udma_match_data am654_mcu_data = {
> .psil_base = 0x6000,
> .enable_memcpy_support = false,
> .statictr_z_mask = GENMASK(11, 0),
> + .burst_size = {
> + TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES, /* Normal Channels */
> + TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES, /* H Channels */
> + 0, /* No UH Channels */
> + },
> };
>
> static struct udma_match_data j721e_main_data = {
> .type = DMA_TYPE_UDMA,
> .psil_base = 0x1000,
> .enable_memcpy_support = true,
> - .flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST | UDMA_FLAG_TDTYPE,
> + .flags = UDMA_FLAGS_J7_CLASS,
> .statictr_z_mask = GENMASK(23, 0),
> + .burst_size = {
> + TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES, /* Normal Channels */
> + TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_256_BYTES, /* H Channels */
> + TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_256_BYTES, /* UH Channels */
> + },
> };
>
> static struct udma_match_data j721e_mcu_data = {
> .type = DMA_TYPE_UDMA,
> .psil_base = 0x6000,
> .enable_memcpy_support = false, /* MEM_TO_MEM is slow via MCU UDMA */
> - .flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST | UDMA_FLAG_TDTYPE,
> + .flags = UDMA_FLAGS_J7_CLASS,
> .statictr_z_mask = GENMASK(23, 0),
> + .burst_size = {
> + TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES, /* Normal Channels */
> + TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_128_BYTES, /* H Channels */
> + 0, /* No UH Channels */
> + },
> };
>
> static struct udma_match_data am64_bcdma_data = {
> .type = DMA_TYPE_BCDMA,
> .psil_base = 0x2000, /* for tchan and rchan, not applicable to bchan */
> .enable_memcpy_support = true, /* Supported via bchan */
> - .flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST | UDMA_FLAG_TDTYPE,
> + .flags = UDMA_FLAGS_J7_CLASS,
> .statictr_z_mask = GENMASK(23, 0),
> + .burst_size = {
> + TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES, /* Normal Channels */
> + 0, /* No H Channels */
> + 0, /* No UH Channels */
> + },
> };
>
> static struct udma_match_data am64_pktdma_data = {
> .type = DMA_TYPE_PKTDMA,
> .psil_base = 0x1000,
> .enable_memcpy_support = false, /* PKTDMA does not support MEM_TO_MEM */
> - .flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST | UDMA_FLAG_TDTYPE,
> + .flags = UDMA_FLAGS_J7_CLASS,
> .statictr_z_mask = GENMASK(23, 0),
> + .burst_size = {
> + TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES, /* Normal Channels */
> + 0, /* No H Channels */
> + 0, /* No UH Channels */
> + },
> };
>
> static const struct of_device_id udma_of_match[] = {
> @@ -5045,6 +5119,35 @@ static void udma_dbg_summary_show(struct seq_file *s,
> }
> #endif /* CONFIG_DEBUG_FS */
>
> +static enum dmaengine_alignment udma_get_copy_align(struct udma_dev *ud)
> +{
> + const struct udma_match_data *match_data = ud->match_data;
> + u8 tpl;
> +
> + if (!match_data->enable_memcpy_support)
> + return DMAENGINE_ALIGN_8_BYTES;
> +
> + /* Get the highest TPL level the device supports for memcpy */
> + if (ud->bchan_cnt) {
> + tpl = udma_get_chan_tpl_index(&ud->bchan_tpl, 0);
> + } else if (ud->tchan_cnt) {
> + tpl = udma_get_chan_tpl_index(&ud->tchan_tpl, 0);
> + } else {
> + return DMAENGINE_ALIGN_8_BYTES;
> + }
Braces seem not required
> +
> + switch (match_data->burst_size[tpl]) {
> + case TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_256_BYTES:
> + return DMAENGINE_ALIGN_256_BYTES;
> + case TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_128_BYTES:
> + return DMAENGINE_ALIGN_128_BYTES;
> + case TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES:
> + fallthrough;
> + default:
> + return DMAENGINE_ALIGN_64_BYTES;
ah, we are supposed to have case at same indent as switch, pls run
checkpatch to have these flagged off
--
~Vinod
