RE: [PATCH v6 01/16] dt-bindings: dma: Add YAML schemas for dw-axi-dmac

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Rob Herring <robh@xxxxxxxxxx>
> Sent: 15 December 2020 6:52 AM
> To: Sia, Jee Heng <jee.heng.sia@xxxxxxxxx>
> Cc: vkoul@xxxxxxxxxx; Eugeniy.Paltsev@xxxxxxxxxxxx;
> andriy.shevchenko@xxxxxxxxxxxxxxx; dmaengine@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v6 01/16] dt-bindings: dma: Add YAML schemas
> for dw-axi-dmac
> 
> On Fri, Dec 11, 2020 at 08:46:27AM +0800, Sia Jee Heng wrote:
> > YAML schemas Device Tree (DT) binding is the new format for DT to
> > replace the old format. Introduce YAML schemas DT binding for
> > dw-axi-dmac and remove the old version.
> >
> > Signed-off-by: Sia Jee Heng <jee.heng.sia@xxxxxxxxx>
> > ---
> >  .../bindings/dma/snps,dw-axi-dmac.txt         |  39 ------
> >  .../bindings/dma/snps,dw-axi-dmac.yaml        | 125
> ++++++++++++++++++
> >  2 files changed, 125 insertions(+), 39 deletions(-)  delete mode
> > 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-
> dmac.txt
> >  create mode 100644
> > Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
> 
> 
> > diff --git
> > a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
> > b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
> > new file mode 100644
> > index 000000000000..61ad37a3f559
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-
> dmac.yaml
> > @@ -0,0 +1,125 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML
> 1.2
> > +---
> > +$id: http://devicetree.org/schemas/dma/snps,dw-axi-dmac.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Synopsys DesignWare AXI DMA Controller
> > +
> > +maintainers:
> > +  - Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx>
> > +
> > +description:
> > +  Synopsys DesignWare AXI DMA Controller DT Binding
> 
> allOf:
>   - $ref: dma-controller.yaml#
[>>] Thanks. Will include it in next version.
> 
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - snps,axi-dma-1.01a
> > +
> > +  reg:
> > +    items:
> > +      - description: Address range of the DMAC registers
> > +
> > +  reg-names:
> > +    items:
> > +      - const: axidma_ctrl_regs
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: Bus Clock
> > +      - description: Module Clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: core-clk
> > +      - const: cfgr-clk
> > +
> > +  '#dma-cells':
> > +    const: 1
> > +
> > +  dma-channels:
> > +    description: |
> > +      Number of channels supported by hardware.
> 
> Already described in dma-controller.yaml
[>>] Thanks. Will remove the description in next version but keep the constraint.
> 
> > +    minimum: 1
> > +    maximum: 8
> > +
> > +  snps,dma-masters:
> > +    description: |
> > +      Number of AXI masters supported by the hardware.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    enum: [1, 2]
> > +    default: 2
> > +
> > +  snps,data-width:
> > +    description: |
> > +      AXI data width supported by hardware.
> > +      (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    enum: [0, 1, 2, 3, 4, 5, 6]
> > +    default: 4
> > +
> > +  snps,priority:
> > +    description: |
> > +      Channel priority specifier associated with the DMA channels.
> > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > +    minItems: 1
> > +    maxItems: 8
> > +    default: [0, 1, 2, 3]
> > +
> > +  snps,block-size:
> > +    description: |
> > +      Channel block size specifier associated with the DMA channels.
> > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > +    minItems: 1
> > +    maxItems: 8
> > +    default: [4096, 4096, 4096, 4096]
> > +
> > +  snps,axi-max-burst-len:
> > +    description: |
> > +      Restrict master AXI burst length by value specified in this
> property.
> > +      If this property is missing the maximum AXI burst length
> supported by
> > +      DMAC is used.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    minimum: 1
> > +    maximum: 256
> > +    default: 16
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +  - interrupts
> > +  - '#dma-cells'
> 
> Already required.
[>>] Hope the comment "already required" is for the below properties. 
> 
> > +  - dma-channels
> > +  - snps,dma-masters
> > +  - snps,data-width
> > +  - snps,priority
> > +  - snps,block-size
> 
> How can these be both required and have a default?
[>>] Thanks. Those are required properties, perhaps I should remove the default field to avoid misunderstanding. 
> 
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +     #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +     #include <dt-bindings/interrupt-controller/irq.h>
> > +     /* example with snps,dw-axi-dmac */
> > +     dmac: dma-controller@80000 {
> > +         compatible = "snps,axi-dma-1.01a";
> > +         reg = <0x80000 0x400>;
> > +         clocks = <&core_clk>, <&cfgr_clk>;
> > +         clock-names = "core-clk", "cfgr-clk";
> > +         interrupt-parent = <&intc>;
> > +         interrupts = <27>;
> > +         #dma-cells = <1>;
> > +         dma-channels = <4>;
> > +         snps,dma-masters = <2>;
> > +         snps,data-width = <3>;
> > +         snps,block-size = <4096 4096 4096 4096>;
> > +         snps,priority = <0 1 2 3>;
> > +         snps,axi-max-burst-len = <16>;
> > +     };
> > --
> > 2.18.0
> >




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux