On Tue, Nov 17, 2020 at 12:56:47PM +0200, Peter Ujfalusi wrote: > New binding document for > Texas Instruments K3 Block Copy DMA (BCDMA). > > BCDMA is introduced as part of AM64. > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> > --- > .../devicetree/bindings/dma/ti/k3-bcdma.yaml | 175 ++++++++++++++++++ > 1 file changed, 175 insertions(+) > create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml > > diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml > new file mode 100644 > index 000000000000..c6d76641ebec > --- /dev/null > +++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml > @@ -0,0 +1,175 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/dma/ti/k3-bcdma.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Texas Instruments K3 DMSS BCDMA Device Tree Bindings > + > +maintainers: > + - Peter Ujfalusi <peter.ujfalusi@xxxxxx> > + > +description: | > + The Block Copy DMA (BCDMA) is intended to perform similar functions as the TR > + mode channels of K3 UDMA-P. > + BCDMA includes block copy channels and Split channels. > + > + Block copy channels mainly used for memory to memory transfers, but with > + optional triggers a block copy channel can service peripherals by accessing > + directly to memory mapped registers or area. > + > + Split channels can be used to service PSI-L based peripherals. > + The peripherals can be PSI-L native or legacy, non PSI-L native peripherals > + with PDMAs. PDMA is tasked to act as a bridge between the PSI-L fabric and the > + legacy peripheral. > + > + PDMAs can be configured via BCDMA split channel's peer registers to match with > + the configuration of the legacy peripheral. > + > +allOf: > + - $ref: /schemas/dma/dma-controller.yaml# > + > +properties: > + "#dma-cells": > + const: 3 > + description: | > + cell 1: type of the BCDMA channel to be used to service the peripheral: > + 0 - split channel > + 1 - block copy channel using global trigger 1 > + 2 - block copy channel using global trigger 2 > + 3 - block copy channel using local trigger > + > + cell 2: parameter for the channel: > + if cell 1 is 0 (split channel): > + PSI-L thread ID of the remote (to BCDMA) end. > + Valid ranges for thread ID depends on the data movement direction: > + for source thread IDs (rx): 0 - 0x7fff > + for destination thread IDs (tx): 0x8000 - 0xffff > + > + Please refer to the device documentation for the PSI-L thread map and > + also the PSI-L peripheral chapter for the correct thread ID. > + if cell 1 is 1 or 2 (block copy channel using global trigger): > + Unused, ignored > + > + The trigger must be configured for the channel externally to BCDMA, > + channels using global triggers should not be requested directly, but > + via DMA event router. > + if cell 1 is 3 (block copy channel using local trigger): > + bchan number of the locally triggered channel > + > + cell 3: ASEL value for the channel > + > + compatible: > + enum: > + - ti,am64-dmss-bcdma Typically, we put 'compatible' first. > + "#address-cells": > + const: 2 > + > + "#size-cells": > + const: 2 These apply to child nodes, but you don't have any. > + > + reg: > + maxItems: 5 > + > + reg-names: > + items: > + - const: gcfg > + - const: bchanrt > + - const: rchanrt > + - const: tchanrt > + - const: ringrt > + > + msi-parent: true > + > + ti,asel: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: ASEL value for non slave channels > + > + ti,sci-rm-range-bchan: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: | > + Array of BCDMA block-copy channel resource subtypes for resource > + allocation for this host > + minItems: 1 > + # Should be enough > + maxItems: 255 > + items: > + maximum: 0x3f > + > + ti,sci-rm-range-tchan: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: | > + Array of BCDMA split tx channel resource subtypes for resource allocation > + for this host > + minItems: 1 > + # Should be enough > + maxItems: 255 > + items: > + maximum: 0x3f > + > + ti,sci-rm-range-rchan: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: | > + Array of BCDMA split rx channel resource subtypes for resource allocation > + for this host > + minItems: 1 > + # Should be enough > + maxItems: 255 > + items: > + maximum: 0x3f > + > +required: > + - compatible > + - "#address-cells" > + - "#size-cells" > + - "#dma-cells" > + - reg > + - reg-names > + - msi-parent > + - ti,sci > + - ti,sci-dev-id > + - ti,sci-rm-range-bchan > + - ti,sci-rm-range-tchan > + - ti,sci-rm-range-rchan > + > +unevaluatedProperties: false > + > +examples: > + - |+ > + cbass_main { > + #address-cells = <2>; > + #size-cells = <2>; > + > + main_dmss { > + compatible = "simple-mfd"; > + #address-cells = <2>; > + #size-cells = <2>; > + dma-ranges; > + ranges; > + > + ti,sci-dev-id = <25>; > + > + main_bcdma: dma-controller@485c0100 { > + compatible = "ti,am64-dmss-bcdma"; > + #address-cells = <2>; > + #size-cells = <2>; > + > + reg = <0x0 0x485c0100 0x0 0x100>, > + <0x0 0x4c000000 0x0 0x20000>, > + <0x0 0x4a820000 0x0 0x20000>, > + <0x0 0x4aa40000 0x0 0x20000>, > + <0x0 0x4bc00000 0x0 0x100000>; > + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; > + msi-parent = <&inta_main_dmss>; > + #dma-cells = <3>; > + > + ti,sci = <&dmsc>; > + ti,sci-dev-id = <26>; > + > + ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ > + ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ > + ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ > + }; > + }; > + }; > -- > Peter > > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. > Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki >
