From: Yangtao Li <frank@xxxxxxxxxxxxxxxxx>
The dma of a100 is similar to h6, with some minor changes to
support greater addressing capabilities.
Add support for it.
Signed-off-by: Yangtao Li <frank@xxxxxxxxxxxxxxxxx>
---
drivers/dma/sun6i-dma.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index f5f9c86c50bc..5cadd4d2b824 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -1173,6 +1173,30 @@ static struct sun6i_dma_config sun50i_a64_dma_cfg = {
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
};
+/*
+ * TODO: Add support for more than 4g physical addressing.
+ *
+ * The A100 binding uses the number of dma channels from the
+ * device tree node.
+ */
+static struct sun6i_dma_config sun50i_a100_dma_cfg = {
+ .clock_autogate_enable = sun6i_enable_clock_autogate_h3,
+ .set_burst_length = sun6i_set_burst_length_h3,
+ .set_drq = sun6i_set_drq_h6,
+ .set_mode = sun6i_set_mode_h6,
+ .src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
+ .dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
+ .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
+ .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
+ .has_mbus_clk = true,
+};
+
/*
* The H6 binding uses the number of dma channels from the
* device tree node.
@@ -1225,6 +1249,7 @@ static const struct of_device_id sun6i_dma_match[] = {
{ .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg },
{ .compatible = "allwinner,sun8i-v3s-dma", .data = &sun8i_v3s_dma_cfg },
{ .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg },
+ { .compatible = "allwinner,sun50i-a100-dma", .data = &sun50i_a100_dma_cfg },
{ .compatible = "allwinner,sun50i-h6-dma", .data = &sun50i_h6_dma_cfg },
{ /* sentinel */ }
};
--
2.28.0
