Re: [PATCH v4] dmaengine: qcom: Add ADM driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 09, 2020 at 05:11:21PM +0530, Vinod Koul wrote:
> HI Jonathan,
> 
> On 23-09-20, 20:40, Jonathan McDowell wrote:
> > Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
> > controller found in the MSM8x60 and IPQ/APQ8064 platforms.
> 
> Mostly it looks good, some nitpicks
> 
> > The ADM supports both memory to memory transactions and memory
> > to/from peripheral device transactions.  The controller also provides
> > flow control capabilities for transactions to/from peripheral devices.
> > 
> > The initial release of this driver supports slave transfers to/from
> > peripherals and also incorporates CRCI (client rate control interface)
> > flow control.
> 
> Can you also convert the binding from txt to yaml?

Seems like that can be a separate patch, but sure, I'll give it a whirl.

> > diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
> > index 3bcb689162c6..0389d60d2604 100644
> > --- a/drivers/dma/qcom/Kconfig
> > +++ b/drivers/dma/qcom/Kconfig
> > @@ -1,4 +1,15 @@
> >  # SPDX-License-Identifier: GPL-2.0-only
> > +config QCOM_ADM
> > +	tristate "Qualcomm ADM support"
> > +	depends on (ARCH_QCOM || COMPILE_TEST) && !PHYS_ADDR_T_64BIT
> 
> why !PHYS_ADDR_T_64BIT ..?

The hardware only supports a 32 bit physical address, so specifying
!PHYS_ADDR_T_64BIT gives maximum COMPILE_TEST coverage without having to
spend effort on kludging things in the code that will never actually be
needed on real hardware.

> > +	select DMA_ENGINE
> > +	select DMA_VIRTUAL_CHANNELS
> > +	help
> > +	  Enable support for the Qualcomm Application Data Mover (ADM) DMA
> > +	  controller, as present on MSM8x60, APQ8064, and IPQ8064 devices.
> > +	  This controller provides DMA capabilities for both general purpose
> > +	  and on-chip peripheral devices.
> 
> > +static const struct of_device_id adm_of_match[] = {
> > +	{ .compatible = "qcom,adm", },
> 
> I know we have merged the binding, but should we not have a soc specific
> compatible?

Which soc? Looking at the other QCOM DMA drivers they mostly have
versioned compatibles and I can't find any indication there are multiple
variants of this block out there.

J.

-- 
Web [ Every program is either trivial or it contains at least one  ]
site: https:// [                   bug.                   ]      Made by
www.earth.li/~noodles/  [                      ]         HuggieTag 0.0.24



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux