Add DT bindings YAML schema for DMA controller driver of Lightning Mountain (LGM) SoC. Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@xxxxxxxxxxxxxxx> --- v1: - Initial version. v2: - Fix bot errors. v3: - No change. v4: - Address Thomas langer comments - use node name pattern as dma-controller as in common binding. - Remove "_" (underscore) in instance name. - Remove "port-" and "chan-" in attribute name for both 'dma-ports' & 'dma-channels' child nodes. v5: - Moved some of the attributes in 'dma-ports' & 'dma-channels' child nodes to dma client/consumer side as cells in 'dmas' properties. v6: - Add additionalProperties: false - completely removed 'dma-ports' and 'dma-channels' child nodes. - Moved channel dt properties to client side dmas. - Use standard dma-channels and dma-channel-mask properties. - Documented reset-names - Add description for dma-cells v7: - modified compatible to oneof - Reduced number of dma-cells to 3 - Fine tune the description of some properties. v7-resend: - rebase to 5.10-rc1 v8: - rebased to 5.10-rc3 - Fixing the bot issues (wrong indentation) --- .../devicetree/bindings/dma/intel,ldma.yaml | 134 +++++++++++++++++++++ 1 file changed, 134 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/intel,ldma.yaml diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml new file mode 100644 index 000000000000..7cf0eab1a703 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/intel,ldma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lightning Mountain centralized low speed DMA and high speed DMA controllers. + +maintainers: + - chuanhua.lei@xxxxxxxxx + - mallikarjunax.reddy@xxxxxxxxx + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + $nodename: + pattern: "^dma-controller(@.*)?$" + + compatible: + oneOf: + - const: intel,lgm-cdma + - const: intel,lgm-dma2tx + - const: intel,lgm-dma1rx + - const: intel,lgm-dma1tx + - const: intel,lgm-dma0tx + - const: intel,lgm-dma3 + - const: intel,lgm-toe-dma30 + - const: intel,lgm-toe-dma31 + + reg: + maxItems: 1 + + "#dma-cells": + const: 3 + description: + The first cell is the peripheral's DMA request line. + The second cell is the peripheral's (port) number corresponding to the channel. + The third cell is the burst length of the channel. + + dma-channels: + minimum: 1 + maximum: 16 + + dma-channel-mask: + items: + minItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + items: + - const: ctrl + + interrupts: + maxItems: 1 + + intel,dma-poll-cnt: + $ref: /schemas/types.yaml#definitions/uint32 + description: + DMA descriptor polling counter is used to control the poling mechanism + for the descriptor fetching for all channels. + + intel,dma-byte-en: + type: boolean + description: + DMA byte enable is only valid for DMA write(RX). + Byte enable(1) means DMA write will be based on the number of dwords + instead of the whole burst. + + intel,dma-drb: + type: boolean + description: + DMA descriptor read back to make sure data and desc synchronization. + + intel,dma-desc-in-sram: + type: boolean + description: + DMA descritpors in SRAM or not. Some old controllers descriptors + can be in DRAM or SRAM. The new ones are all in SRAM. + + intel,dma-orrc: + $ref: /schemas/types.yaml#definitions/uint32 + description: + DMA outstanding read counter value determine the number of + ORR-Outstanding Read Request. The maximum value is 16. + intel,dma-dburst-wr: + type: boolean + description: + Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst; + if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16. + It only applies to RX DMA and memcopy DMA. + +required: + - compatible + - reg + - '#dma-cells' + +additionalProperties: false + +examples: + - | + dma0: dma-controller@e0e00000 { + compatible = "intel,lgm-cdma"; + reg = <0xe0e00000 0x1000>; + #dma-cells = <3>; + dma-channels = <16>; + dma-channel-mask = <0xFFFF>; + interrupt-parent = <&ioapic1>; + interrupts = <82 1>; + resets = <&rcu0 0x30 0>; + reset-names = "ctrl"; + clocks = <&cgu0 80>; + intel,dma-poll-cnt = <4>; + intel,dma-byte-en; + intel,dma-drb; + }; + - | + dma3: dma-controller@ec800000 { + compatible = "intel,lgm-dma3"; + reg = <0xec800000 0x1000>; + clocks = <&cgu0 71>; + resets = <&rcu0 0x10 9>; + #dma-cells = <3>; + intel,dma-poll-cnt = <16>; + intel,dma-desc-in-sram; + intel,dma-orrc = <16>; + intel,dma-byte-en; + intel,dma-dburst-wr; + }; -- 2.11.0
