Currently, the MOVDIR64B instruction is used to atomically submit 64-byte work descriptors to devices. Although it can encounter errors like faults, MOVDIR64B can not report back on errors from the device itself. This means that MOVDIR64B users need to separately interact with a device to see if a descriptor was successfully queued, which slows down device interactions. ENQCMD and ENQCMDS also atomically submit 64-byte work descriptors to devices. But, they *can* report back errors directly from the device, such as if the device was busy, or there was an error made in composing the descriptor. This immediate feedback from the submission instruction itself reduces the number of interactions with the device and can greatly increase efficiency. ENQCMD can be used at any privilege level, but can effectively only submit work on behalf of the current process. ENQCMDS is a ring0-only instruction and can explicitly specify a process context instead of being tied to the current process or needing to reprogram the IA32_PASID MSR. Use ENQCMDS for work submission within the kernel because a Process Address ID (PASID) is setup to translate the kernel virtual address space. This PASID is provided to ENQCMDS from the descriptor structure submitted to the device and not retrieved from IA32_PASID MSR, which is setup for the current user address space. See Intel Software Developer’s Manual for more information on the instructions. Add enqcmds() in x86 io.h instead of special_insns.h. MOVDIR64B instruction can be used for other purposes. A wrapper was introduced in io.h for its command submission usage. ENQCMDS has a single purpose of submit 64-byte commands to supported devices and should be called directly. Signed-off-by: Dave Jiang <dave.jiang@xxxxxxxxx> Reviewed-by: Tony Luck <tony.luck@xxxxxxxxx> --- arch/x86/include/asm/io.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index d726459d08e5..b7af0bf8a018 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -424,4 +424,33 @@ static inline void iosubmit_cmds512(void __iomem *dst, const void *src, } } +/** + * enqcmds - copy a 512 bits data unit to single MMIO location + * @dst: destination, in MMIO space (must be 512-bit aligned) + * @src: source + * + * Submit data from kernel space to MMIO space, in a unit of 512 bits. + * Order of data access is not guaranteed, nor is a memory barrier + * performed afterwards. The command returns false (0) on failure, and true (1) + * on success. + * + * Warning: Do not use this helper unless your driver has checked that the CPU + * instruction is supported on the platform. + */ +static inline bool enqcmds(void __iomem *dst, const void *src) +{ + bool retry; + + /* ENQCMDS [rdx], rax */ + asm volatile(".byte 0xf3, 0x0f, 0x38, 0xf8, 0x02, 0x66, 0x90\t\n" + CC_SET(z) + : CC_OUT(z) (retry) + : "a" (dst), "d" (src)); + /* Submission failure is indicated via EFLAGS.ZF=1 */ + if (retry) + return false; + + return true; +} + #endif /* _ASM_X86_IO_H */