Hi Amireddy, On 09-09-20, 07:07, Amireddy Mallikarjuna reddy wrote: > Add DT bindings YAML schema for DMA controller driver > of Lightning Mountain(LGM) SoC. > > Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@xxxxxxxxxxxxxxx> > --- > v1: > - Initial version. > > v2: > - Fix bot errors. > > v3: > - No change. > > v4: > - Address Thomas langer comments > - use node name pattern as dma-controller as in common binding. > - Remove "_" (underscore) in instance name. > - Remove "port-" and "chan-" in attribute name for both 'dma-ports' & 'dma-channels' child nodes. > > v5: > - Moved some of the attributes in 'dma-ports' & 'dma-channels' child nodes to dma client/consumer side as cells in 'dmas' properties. > > v6: > - Add additionalProperties: false > - completely removed 'dma-ports' and 'dma-channels' child nodes. > - Moved channel dt properties to client side dmas. > - Use standard dma-channels and dma-channel-mask properties. > - Documented reset-names > - Add description for dma-cells > --- > .../devicetree/bindings/dma/intel,ldma.yaml | 154 +++++++++++++++++++++ > 1 file changed, 154 insertions(+) > create mode 100644 Documentation/devicetree/bindings/dma/intel,ldma.yaml > > diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml > new file mode 100644 > index 000000000000..4a2a12b829eb > --- /dev/null > +++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml > @@ -0,0 +1,154 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/dma/intel,ldma.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Lightning Mountain centralized low speed DMA and high speed DMA controllers. > + > +maintainers: > + - chuanhua.lei@xxxxxxxxx > + - mallikarjunax.reddy@xxxxxxxxx > + > +allOf: > + - $ref: "dma-controller.yaml#" > + > +properties: > + $nodename: > + pattern: "^dma-controller(@.*)?$" > + > + compatible: > + enum: > + - intel,lgm-cdma > + - intel,lgm-dma2tx > + - intel,lgm-dma1rx > + - intel,lgm-dma1tx > + - intel,lgm-dma0tx > + - intel,lgm-dma3 > + - intel,lgm-toe-dma30 > + - intel,lgm-toe-dma31 Should this not say oneOf? > + > + reg: > + maxItems: 1 > + > + "#dma-cells": > + const: 11 wow that is a big one > + description: > + The first & second cell is channel and port id's respectievly. What does port id mean? Can you please describe each parameter > + Third & fourth cells is Per channel data & descriptor endianness configuration respectievly according to SoC requirement. What does per channel data refer? Isnt this all little endian? > + Fifth cell is Per channel byte offset(0~128) Offset of? > + Sixth cell is per channel Write non-posted type for DMA RX last data beat of every descriptor. Am not sure what this means? > + Seventh cell is per channel packet drop enabled or disabled. Same here > + Eighth and nighth cells, The first is header mode size, the second is checksum enable or disable. > + If enabled, header mode size is ignored. If disabled, header mode size must be provided. > + Last two cells is Per channel dma hardware descriptor configuration. > + The first parameter is descriptor physical address and the second parameter hardware descriptor number Do you really use all these parameters, or most of them are filled with defaults? > + > + dma-channels: > + minimum: 1 > + maximum: 16 > + > + dma-channel-mask: > + $ref: /schemas/types.yaml#/definitions/uint32-array This is already defined in Documentation/devicetree/bindings/dma/dma-common.yaml, no need to define this here > + items: > + minItems: 1 > + # Should be enough > + > + clocks: > + maxItems: 1 > + > + resets: > + maxItems: 1 > + > + reset-names: > + items: > + - const: ctrl > + > + interrupts: > + maxItems: 1 > + > + intel,dma-poll-cnt: > + $ref: /schemas/types.yaml#definitions/uint32 > + description: > + DMA descriptor polling counter. It may need fine tune according > + to the system application scenario. What does this mean? How will system application fine tune? > + > + intel,dma-byte-en: > + type: boolean > + description: > + DMA byte enable is only valid for DMA write(RX). > + Byte enable(1) means DMA write will be based on the number of dwords > + instead of the whole burst. You already have this in #dma-cells, so why here. If here then why in dma-cells > + > + intel,dma-drb: > + type: boolean > + description: > + DMA descriptor read back to make sure data and desc synchronization. I think this is also in #dma-cells? > + > + intel,dma-burst: > + $ref: /schemas/types.yaml#definitions/uint32 > + description: > + Specifiy the DMA burst size(in dwords), the valid value will be 8, 16, 32. > + Default is 16 for data path dma, 32 is for memcopy DMA. Burst should come from client, why is this here? > + > + intel,dma-polling-cnt: > + $ref: /schemas/types.yaml#definitions/uint32 > + description: > + DMA descriptor polling counter. It may need fine tune according to > + the system application scenario. What does this counter do? > + > + intel,dma-desc-in-sram: > + type: boolean > + description: > + DMA descritpors in SRAM or not. Some old controllers descriptors > + can be in DRAM or SRAM. The new ones are all in SRAM. What does this do? > + > + intel,dma-orrc: > + $ref: /schemas/types.yaml#definitions/uint32 > + description: > + DMA outstanding read counter. The maximum value is 16, and it may > + need fine tune according to the system application scenarios. What does this do? > + > + intel,dma-dburst-wr: > + type: boolean > + description: > + Enable RX dynamic burst write. It only applies to RX DMA and memcopy DMA. What does this do? > + > +required: > + - compatible > + - reg > + - '#dma-cells' > + > +additionalProperties: false > + > +examples: > + - | > + dma0: dma-controller@e0e00000 { > + compatible = "intel,lgm-cdma"; > + reg = <0xe0e00000 0x1000>; > + #dma-cells = <11>; > + dma-channels = <16>; > + dma-channel-mask = <0xFFFF>; > + interrupt-parent = <&ioapic1>; > + interrupts = <82 1>; > + resets = <&rcu0 0x30 0>; > + reset-names = "ctrl"; > + clocks = <&cgu0 80>; > + intel,dma-poll-cnt = <4>; > + intel,dma-byte-en; > + intel,dma-drb; > + }; > + - | > + dma3: dma-controller@ec800000 { > + compatible = "intel,lgm-dma3"; > + reg = <0xec800000 0x1000>; > + clocks = <&cgu0 71>; > + resets = <&rcu0 0x10 9>; > + #dma-cells = <11>; > + intel,dma-burst = <32>; > + intel,dma-polling-cnt = <16>; > + intel,dma-desc-in-sram; > + intel,dma-orrc = <16>; > + intel,dma-byte-en; > + intel,dma-dburst-wr; > + }; > -- > 2.11.0 -- ~Vinod