Various DMA users call the dmaengine_slave_config() and expect it to succeed, but that can only succeed if .device_config is implemented. Add empty device_config function rather than patching all the places which use dmaengine_slave_config(). Signed-off-by: Marek Vasut <marex@xxxxxxx> Cc: Akinobu Mita <akinobu.mita@xxxxxxxxx> Cc: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx> Cc: Michal Simek <monstr@xxxxxxxxx> Cc: Vinod Koul <vinod.koul@xxxxxxxxx> --- drivers/dma/xilinx/xilinx_dma.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c index 5429497d3560b..058150ff9e0d9 100644 --- a/drivers/dma/xilinx/xilinx_dma.c +++ b/drivers/dma/xilinx/xilinx_dma.c @@ -1637,6 +1637,17 @@ static void xilinx_dma_issue_pending(struct dma_chan *dchan) spin_unlock_irqrestore(&chan->lock, flags); } +/** + * xilinx_dma_issue_pending - Configure the DMA channel + * @dchan: DMA channel + * @config: channel configuration + */ +static int xilinx_dma_device_config(struct dma_chan *dchan, + struct dma_slave_config *config) +{ + return 0; +} + /** * xilinx_dma_complete_descriptor - Mark the active descriptor as complete * @chan : xilinx DMA channel @@ -3076,6 +3087,7 @@ static int xilinx_dma_probe(struct platform_device *pdev) xdev->common.device_terminate_all = xilinx_dma_terminate_all; xdev->common.device_tx_status = xilinx_dma_tx_status; xdev->common.device_issue_pending = xilinx_dma_issue_pending; + xdev->common.device_config = xilinx_dma_device_config; if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) { dma_cap_set(DMA_CYCLIC, xdev->common.cap_mask); xdev->common.device_prep_slave_sg = xilinx_dma_prep_slave_sg; -- 2.26.2