Hi Vinod,
On 2/24/20 6:37 PM, Vinod Koul wrote:
> On 05-02-20, 13:15, Peter Ujfalusi wrote:
>> Via the /sys/kernel/debug/dmaengine users can get information about the
>> DMA devices and the used channels.
>>
>> Example output on am654-evm with audio using two channels and after running
>> dmatest on 6 channels:
>>
>> # cat /sys/kernel/debug/dmaengine
>> dma0 (285c0000.dma-controller): number of channels: 96
>>
>> dma1 (31150000.dma-controller): number of channels: 267
>> dma1chan0 | 2b00000.mcasp:tx
>> dma1chan1 | 2b00000.mcasp:rx
>> dma1chan2 | in-use
>> dma1chan3 | in-use
>> dma1chan4 | in-use
>> dma1chan5 | in-use
>> dma1chan6 | in-use
>> dma1chan7 | in-use
>>
>> For slave channels we can show the device and the channel name a given
>> channel is requested.
>> For non slave devices the only information we know is that the channel is
>> in use.
>>
>> DMA drivers can implement the optional dbg_show callback to provide
>> controller specific information instead of the generic one.
>>
>> It is easy to extend the generic dmaengine_dbg_show() to print additional
>> information about the used channels.
>>
>> I have taken the idea from gpiolib.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
>> ---
>> Hi,
>>
>> Changes since v2:
>> - Use dma_chan_name() for printing the channel's name
>>
>> Changes since v1:
>> - Use much more simplified fops for the debugfs file (via DEFINE_SHOW_ATTRIBUTE)
>> - do not allow modification to dma_device_list while the debugfs file is read
>> - rename the slave_name to dbg_client_name (it is only for debugging)
>> - print information about dma_router if it is used by the channel
>> - Formating of the output slightly changed
>>
>> Regards,
>> Peter
>>
>> drivers/dma/dmaengine.c | 65 +++++++++++++++++++++++++++++++++++++++
>> include/linux/dmaengine.h | 12 +++++++-
>> 2 files changed, 76 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
>> index c3b1283b6d31..37c3a4cd5b1a 100644
>> --- a/drivers/dma/dmaengine.c
>> +++ b/drivers/dma/dmaengine.c
>> @@ -32,6 +32,7 @@
>> #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>>
>> #include <linux/platform_device.h>
>> +#include <linux/debugfs.h>
>> #include <linux/dma-mapping.h>
>> #include <linux/init.h>
>> #include <linux/module.h>
>> @@ -760,6 +761,11 @@ struct dma_chan *dma_request_chan(struct device *dev, const char *name)
>> return chan ? chan : ERR_PTR(-EPROBE_DEFER);
>>
>> found:
>> +#ifdef CONFIG_DEBUG_FS
>> + chan->dbg_client_name = kasprintf(GFP_KERNEL, "%s:%s", dev_name(dev),
>> + name);
>> +#endif
>> +
>> chan->name = kasprintf(GFP_KERNEL, "dma:%s", name);
>> if (!chan->name)
>> return chan;
>> @@ -837,6 +843,11 @@ void dma_release_channel(struct dma_chan *chan)
>> chan->name = NULL;
>> chan->slave = NULL;
>> }
>> +
>> +#ifdef CONFIG_DEBUG_FS
>> + kfree(chan->dbg_client_name);
>> + chan->dbg_client_name = NULL;
>> +#endif
>> mutex_unlock(&dma_list_mutex);
>> }
>> EXPORT_SYMBOL_GPL(dma_release_channel);
>> @@ -1562,3 +1573,57 @@ static int __init dma_bus_init(void)
>> return class_register(&dma_devclass);
>> }
>> arch_initcall(dma_bus_init);
>> +
>> +#ifdef CONFIG_DEBUG_FS
>> +static void dmaengine_dbg_show(struct seq_file *s, struct dma_device *dma_dev)
>> +{
>> + struct dma_chan *chan;
>> +
>> + list_for_each_entry(chan, &dma_dev->channels, device_node) {
>> + if (chan->client_count) {
>> + seq_printf(s, " %-13s| %s", dma_chan_name(chan),
>> + chan->dbg_client_name ?: "in-use");
>> +
>> + if (chan->router)
>> + seq_printf(s, " (via router: %s)\n",
>> + dev_name(chan->router->dev));
>> + else
>> + seq_puts(s, "\n");
>> + }
>> + }
>> +}
>> +
>> +static int dmaengine_debugfs_show(struct seq_file *s, void *data)
>> +{
>> + struct dma_device *dma_dev = NULL;
>> +
>> + mutex_lock(&dma_list_mutex);
>> + list_for_each_entry(dma_dev, &dma_device_list, global_node) {
>> + seq_printf(s, "dma%d (%s): number of channels: %u\n",
>> + dma_dev->dev_id, dev_name(dma_dev->dev),
>> + dma_dev->chancnt);
>> +
>> + if (dma_dev->dbg_show)
>> + dma_dev->dbg_show(s, dma_dev);
> do we really want a custom dbg_show()..? Drivers can add their own
> files...
They could do that already ;)
With the custom dbg_show() DMA drivers can save on the surrounding
code and just fill in the information regarding to their HW.
Again, on am654 the default information is:
# cat /sys/kernel/debug/dmaengine
dma0 (285c0000.dma-controller): number of channels: 96
dma1 (31150000.dma-controller): number of channels: 267
dma1chan0 | 2b00000.mcasp:tx
dma1chan1 | 2b00000.mcasp:rx
dma1chan2 | in-use
dma1chan3 | in-use
dma1chan4 | in-use
dma1chan5 | in-use
With my current .dbg_show implementation for k3-udma:
# cat /sys/kernel/debug/dmaengine
dma0 (285c0000.dma-controller): number of channels: 96
dma1 (31150000.dma-controller): number of channels: 267
dma1chan0 | 2b00000.mcasp:tx (MEM_TO_DEV, tchan8 [0x1008 -> 0xc400], PDMA, TR mode)
dma1chan1 | 2b00000.mcasp:rx (DEV_TO_MEM, rchan8 [0x4400 -> 0x9008], PDMA, TR mode)
dma1chan2 | in-use (MEM_TO_MEM, chan2 pair [0x1002 -> 0x9002], PSI-L Native, TR mode)
dma1chan3 | in-use (MEM_TO_MEM, chan3 pair [0x1003 -> 0x9003], PSI-L Native, TR mode)
dma1chan4 | in-use (MEM_TO_MEM, chan4 pair [0x1004 -> 0x9004], PSI-L Native, TR mode)
dma1chan5 | in-use (MEM_TO_MEM, chan5 pair [0x1005 -> 0x9005], PSI-L Native, TR mode)
For me this makes a huge difference.
>
>> + else
>> + dmaengine_dbg_show(s, dma_dev);
>> +
>> + if (!list_is_last(&dma_dev->global_node, &dma_device_list))
>> + seq_puts(s, "\n");
>> + }
>> + mutex_unlock(&dma_list_mutex);
>> +
>> + return 0;
>> +}
>> +DEFINE_SHOW_ATTRIBUTE(dmaengine_debugfs);
>> +
>> +static int __init dmaengine_debugfs_init(void)
>> +{
>> + /* /sys/kernel/debug/dmaengine */
>> + debugfs_create_file("dmaengine", 0444, NULL, NULL,
>> + &dmaengine_debugfs_fops);
>
> Should we add a directory? That way we can keep adding stuff into that
> one
and have this file as 'summary' underneath?
I like the fact hat I can get all the information via one file.
Saves a lot of time (and explaining to users) on finding the correct
one to cat...
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
