We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Note that we want to use separate compatible for omap2420 and omap2430 so let's do that here too while at it. Cc: devicetree@xxxxxxxxxxxxxxx Cc: Aaro Koskinen <aaro.koskinen@xxxxxx> Cc: Arnd Bergmann <arnd@xxxxxxxx> Cc: Peter Ujfalusi <peter.ujfalusi@xxxxxx> Cc: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> Cc: Vinod Koul <vkoul@xxxxxxxxxx> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- arch/arm/boot/dts/omap2.dtsi | 42 +++++++++++++++++++++++++-------- arch/arm/boot/dts/omap2430.dtsi | 4 ++++ 2 files changed, 36 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -8,6 +8,7 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/omap.h> @@ -79,17 +80,38 @@ intc: interrupt-controller@1 { reg = <0x480FE000 0x1000>; }; - sdma: dma-controller@48056000 { - compatible = "ti,omap2430-sdma", "ti,omap2420-sdma"; + target-module@48056000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "dma"; - reg = <0x48056000 0x1000>; - interrupts = <12>, - <13>, - <14>, - <15>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <64>; + reg = <0x48056000 0x4>, + <0x4805602c 0x4>, + <0x48056028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&core_l3_ck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48056000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap2420-sdma", "ti,omap-sdma"; + reg = <0 0x1000>; + interrupts = <12>, + <13>, + <14>, + <15>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <64>; + }; }; i2c1: i2c@48070000 { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -309,6 +309,10 @@ wd_timer2: wdt@49016000 { }; }; +&sdma { + compatible = "ti,omap2430-sdma", "ti,omap-sdma"; +}; + &i2c1 { compatible = "ti,omap2430-i2c"; }; -- 2.24.1