Re: Regression: dmaengine: imx28 with emmc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14-10-19, 16:13, Sascha Hauer wrote:
> Hi Bruno,
> 
> On Tue, Oct 08, 2019 at 10:03:16AM +0200, Bruno Thomsen wrote:
> > Hi
> > 
> > I am getting a kernel oops[1] during boot on imx28 with emmc flash right
> > around rootfs mounting. Using git bisect I found the cause to be the
> > following commit.
> > 
> > Regression: ceeeb99cd821 ("dmaengine: mxs: rename custom flag")
> > 
> > Reverting the 2 changes in drivers/dma/mxs-dma.c fixes the oops,
> > but I am not sure that is the right solution as I don't have the full
> > mxs-dma + mtd/mmc overview.
> > 
> > I did see that the patch isn't a simple rename but also a bit define
> > change.
> > From: DMA_CTRL_ACK = (1 << 1) = BIT(1)
> > To: MXS_DMA_CTRL_WAIT4END = BIT(31)
> > 
> 
> Damn, I wasn't aware the DMA driver has other users than the GPMI Nand.
> Please try the attached patch, it should fix it for MMC/SD. It seems
> however, that I2C and AUART and SPI are also affected. Are you able to
> test any of these?
> 
> Sascha
> 
> ---------------------------8<---------------------------
> 
> >From 3f7a1097099c9e57e31a86503edc479f9964bc95 Mon Sep 17 00:00:00 2001
> From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Date: Mon, 14 Oct 2019 16:07:31 +0200
> Subject: [PATCH] mmc: mxs: fix flags passed to dmaengine_prep_slave_sg
> 
> Since ceeeb99cd821 we no longer abuse the DMA_CTRL_ACK flag for custom
> driver use and introduced the MXS_DMA_CTRL_WAIT4END instead. We have not
> changed all users to this flag though. This patch fixes it for the
> mxs-mmc driver.

lgtm, this should be submitted to mmc folks

> 
> Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag")
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> ---
>  drivers/mmc/host/mxs-mmc.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
> index 78e7e350655c..4031217d21c3 100644
> --- a/drivers/mmc/host/mxs-mmc.c
> +++ b/drivers/mmc/host/mxs-mmc.c
> @@ -17,6 +17,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/dmaengine.h>
> +#include <linux/dma/mxs-dma.h>
>  #include <linux/highmem.h>
>  #include <linux/clk.h>
>  #include <linux/err.h>
> @@ -266,7 +267,7 @@ static void mxs_mmc_bc(struct mxs_mmc_host *host)
>  	ssp->ssp_pio_words[2] = cmd1;
>  	ssp->dma_dir = DMA_NONE;
>  	ssp->slave_dirn = DMA_TRANS_NONE;
> -	desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
> +	desc = mxs_mmc_prep_dma(host, MXS_DMA_CTRL_WAIT4END);
>  	if (!desc)
>  		goto out;
>  
> @@ -311,7 +312,7 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host)
>  	ssp->ssp_pio_words[2] = cmd1;
>  	ssp->dma_dir = DMA_NONE;
>  	ssp->slave_dirn = DMA_TRANS_NONE;
> -	desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
> +	desc = mxs_mmc_prep_dma(host, MXS_DMA_CTRL_WAIT4END);
>  	if (!desc)
>  		goto out;
>  
> @@ -441,7 +442,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
>  	host->data = data;
>  	ssp->dma_dir = dma_data_dir;
>  	ssp->slave_dirn = slave_dirn;
> -	desc = mxs_mmc_prep_dma(host, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> +	desc = mxs_mmc_prep_dma(host, DMA_PREP_INTERRUPT | MXS_DMA_CTRL_WAIT4END);
>  	if (!desc)
>  		goto out;
>  
> -- 
> 2.23.0
> 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
~Vinod



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux