On 9/30/19 11:16 PM, Peter Ujfalusi wrote:
Hi,
Changes since v2
)https://patchwork.kernel.org/project/linux-dmaengine/list/?series=152609&state=*)
- Based on 5.4-rc1
- Support for Flow only data transfer for the glue layer
Grygorii Strashko (3):
bindings: soc: ti: add documentation for k3 ringacc
soc: ti: k3: add navss ringacc driver
dmaengine: ti: k3-udma: Add glue layer for non DMAengine users
Peter Ujfalusi (11):
dmaengine: doc: Add sections for per descriptor metadata support
dmaengine: Add metadata_ops for dma_async_tx_descriptor
dmaengine: Add support for reporting DMA cached data amount
dmaengine: ti: Add cppi5 header for UDMA
dt-bindings: dma: ti: Add document for K3 UDMA
dmaengine: ti: New driver for K3 UDMA - split#1: defines, structs, io
func
dmaengine: ti: New driver for K3 UDMA - split#2: probe/remove, xlate
and filter_fn
dmaengine: ti: New driver for K3 UDMA - split#3: alloc/free
chan_resources
dmaengine: ti: New driver for K3 UDMA - split#4: dma_device callbacks
1
dmaengine: ti: New driver for K3 UDMA - split#5: dma_device callbacks
2
dmaengine: ti: New driver for K3 UDMA - split#6: Kconfig and Makefile
.../devicetree/bindings/dma/ti/k3-udma.txt | 185 +
.../devicetree/bindings/soc/ti/k3-ringacc.txt | 59 +
Documentation/driver-api/dmaengine/client.rst | 75 +
.../driver-api/dmaengine/provider.rst | 46 +
drivers/dma/dmaengine.c | 73 +
drivers/dma/dmaengine.h | 8 +
drivers/dma/ti/Kconfig | 22 +
drivers/dma/ti/Makefile | 2 +
drivers/dma/ti/k3-udma-glue.c | 1225 ++++++
drivers/dma/ti/k3-udma-private.c | 141 +
drivers/dma/ti/k3-udma.c | 3525 +++++++++++++++++
drivers/dma/ti/k3-udma.h | 161 +
drivers/soc/ti/Kconfig | 12 +
drivers/soc/ti/Makefile | 1 +
drivers/soc/ti/k3-ringacc.c | 1165 ++++++
include/dt-bindings/dma/k3-udma.h | 10 +
include/linux/dma/k3-udma-glue.h | 134 +
include/linux/dma/ti-cppi5.h | 1049 +++++
include/linux/dmaengine.h | 110 +
include/linux/soc/ti/k3-ringacc.h | 245 ++
20 files changed, 8248 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-udma.txt
create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt
create mode 100644 drivers/dma/ti/k3-udma-glue.c
create mode 100644 drivers/dma/ti/k3-udma-private.c
create mode 100644 drivers/dma/ti/k3-udma.c
create mode 100644 drivers/dma/ti/k3-udma.h
create mode 100644 drivers/soc/ti/k3-ringacc.c
create mode 100644 include/dt-bindings/dma/k3-udma.h
create mode 100644 include/linux/dma/k3-udma-glue.h
create mode 100644 include/linux/dma/ti-cppi5.h
create mode 100644 include/linux/soc/ti/k3-ringacc.h
Can you please split this series and post drivers/soc/* bits
separately ? If its ready, I can apply k3-ringacc.c changes.
Regards,
Santosh
