In vdma_channel_set_config clear the delay, frame count and master mask before updating their new values. It avoids programming incorrect state when input parameters are different from default. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxxxxx> Acked-by: Appana Durga Kedareswara rao <appana.durga.rao@xxxxxxxxxx> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx> --- drivers/dma/xilinx/xilinx_dma.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c index 1fbe025..5d56f1e 100644 --- a/drivers/dma/xilinx/xilinx_dma.c +++ b/drivers/dma/xilinx/xilinx_dma.c @@ -68,6 +68,9 @@ #define XILINX_DMA_DMACR_CIRC_EN BIT(1) #define XILINX_DMA_DMACR_RUNSTOP BIT(0) #define XILINX_DMA_DMACR_FSYNCSRC_MASK GENMASK(6, 5) +#define XILINX_DMA_DMACR_DELAY_MASK GENMASK(31, 24) +#define XILINX_DMA_DMACR_FRAME_COUNT_MASK GENMASK(23, 16) +#define XILINX_DMA_DMACR_MASTER_MASK GENMASK(11, 8) #define XILINX_DMA_REG_DMASR 0x0004 #define XILINX_DMA_DMASR_EOL_LATE_ERR BIT(15) @@ -2118,8 +2121,10 @@ int xilinx_vdma_channel_set_config(struct dma_chan *dchan, chan->config.gen_lock = cfg->gen_lock; chan->config.master = cfg->master; + dmacr &= ~XILINX_DMA_DMACR_GENLOCK_EN; if (cfg->gen_lock && chan->genlock) { dmacr |= XILINX_DMA_DMACR_GENLOCK_EN; + dmacr &= ~XILINX_DMA_DMACR_MASTER_MASK; dmacr |= cfg->master << XILINX_DMA_DMACR_MASTER_SHIFT; } @@ -2135,11 +2140,13 @@ int xilinx_vdma_channel_set_config(struct dma_chan *dchan, chan->config.delay = cfg->delay; if (cfg->coalesc <= XILINX_DMA_DMACR_FRAME_COUNT_MAX) { + dmacr &= ~XILINX_DMA_DMACR_FRAME_COUNT_MASK; dmacr |= cfg->coalesc << XILINX_DMA_DMACR_FRAME_COUNT_SHIFT; chan->config.coalesc = cfg->coalesc; } if (cfg->delay <= XILINX_DMA_DMACR_DELAY_MAX) { + dmacr &= ~XILINX_DMA_DMACR_DELAY_MASK; dmacr |= cfg->delay << XILINX_DMA_DMACR_DELAY_SHIFT; chan->config.delay = cfg->delay; } -- 1.7.1