Re: [PATCH v2 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 18/09/2019 16.28, Rob Herring wrote:
> On Tue, Sep 10, 2019 at 02:45:57PM +0300, Peter Ujfalusi wrote:
>> Make the dma-channel-mask to be usable for controllers with more than 32
>> channels.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
>> ---
>>  Documentation/devicetree/bindings/dma/dma-common.yaml | 10 +++++++++-
>>  1 file changed, 9 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
>> index ed0a49a6f020..41460946be64 100644
>> --- a/Documentation/devicetree/bindings/dma/dma-common.yaml
>> +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
>> @@ -25,11 +25,19 @@ properties:
>>        Used to provide DMA controller specific information.
>>  
>>    dma-channel-mask:
>> -    $ref: /schemas/types.yaml#definitions/uint32
>>      description:
>>        Bitmask of available DMA channels in ascending order that are
>>        not reserved by firmware and are available to the
>>        kernel. i.e. first channel corresponds to LSB.
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/uint32-array
>> +        items:
>> +          minItems = 1
> 
> '='? Just making up the syntax?

Opps, sorry.

> 
>> +          maxItems = 255 # Should be enough
>> +          - description: Mask of channels 0-31
>> +          - description: Mask of channels 32-63
> 
> You are mixing a schema and list here...

Should I extend the description with something like this:
"The first item in the array is for channels 0-31, the second is for
channels 32-63, etc."

To make sure that it is used in a correct and consistent manner.

>> +          ...
> 
> That's end of doc marker in YAML...

I believe I need some reading to do for YAML..

> 
>> +          - description: Mask of chnanels X-(X+31)
> 
> Obviously, this was not validated with 'make dt_binding_check'.
make dt_bindings_check
make: *** No rule to make target 'dt_bindings_check'.  Stop.

> What you  want is:
> 
>     allOf:
>       - $ref: /schemas/types.yaml#/definitions/uint32-array
>       - minItems: 1
>         maxItems: 255 # Should be enough

OK and thanks for the comments.

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux