Re: [PATCHv2] omap-dma/omap_vout_vrfb: fix off-by-one fi value

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09-08-19, 10:32, Hans Verkuil wrote:
> The OMAP 4 TRM specifies that when using double-index addressing
> the address increases by the ES plus the EI value minus 1 within
> a frame. When a full frame is transferred, the address increases
> by the ES plus the frame index (FI) value minus 1.
> 
> The omap-dma code didn't account for the 'minus 1' in the FI register.
> To get correct addressing, add 1 to the src_icg value.
> 
> This was found when testing a hacked version of the media m2m-deinterlace.c
> driver on a Pandaboard.
> 
> The only other source that uses this feature is omap_vout_vrfb.c,
> and that adds a + 1 when setting the dst_icg. This is a workaround
> for the broken omap-dma.c behavior. So remove the workaround at the
> same time that we fix omap-dma.c.
> 
> I tested the omap_vout driver with a Beagle XM board to check that
> the '+ 1' in omap_vout_vrfb.c was indeed a workaround for the omap-dma
> bug.

Applied, thanks

-- 
~Vinod



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux