Re: [RESEND PATCH] dmaengine: tegra210-adma: Don't program FIFO threshold

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05-07-19, 10:15, Jon Hunter wrote:
> From: Jonathan Hunter <jonathanh@xxxxxxxxxx>
> 
> The Tegra210 ADMA supports two modes for transferring data to a FIFO
> which are ...
> 
> 1. Transfer data to/from the FIFO as soon as a single burst can be
>    transferred.
> 2. Transfer data to/from the FIFO based upon FIFO thresholds, where
>    the FIFO threshold is specified in terms on multiple bursts.
> 
> Currently, the ADMA driver programs the FIFO threshold values in the
> FIFO_CTRL register, but never enables the transfer mode that uses
> these threshold values. Given that these have never been used so far,
> simplify the ADMA driver by removing the programming of these threshold
> values.
> 
> Signed-off-by: Jonathan Hunter <jonathanh@xxxxxxxxxx>
> Acked-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
> 
> Resending the patch rebased on top next-20190704. I have added Thierry's
> ACK as well.

Thanks but this fails as well. I had applied few tegra patches so I
suspect that is causing issues now. It would have been nice to have them
in series.

Would you rebase on
git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git next (yeah
this is different location, i dont see to push to infradead today)

Thanks 

> 
>  drivers/dma/tegra210-adma.c | 12 ++----------
>  1 file changed, 2 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
> index 2805853e963f..d8646a49ba5b 100644
> --- a/drivers/dma/tegra210-adma.c
> +++ b/drivers/dma/tegra210-adma.c
> @@ -42,12 +42,8 @@
>  #define ADMA_CH_CONFIG_MAX_BUFS				8
>  
>  #define ADMA_CH_FIFO_CTRL				0x2c
> -#define TEGRA210_ADMA_CH_FIFO_CTRL_OFLWTHRES(val)	(((val) & 0xf) << 24)
> -#define TEGRA210_ADMA_CH_FIFO_CTRL_STRVTHRES(val)	(((val) & 0xf) << 16)
>  #define TEGRA210_ADMA_CH_FIFO_CTRL_TXSIZE(val)		(((val) & 0xf) << 8)
>  #define TEGRA210_ADMA_CH_FIFO_CTRL_RXSIZE(val)		((val) & 0xf)
> -#define TEGRA186_ADMA_CH_FIFO_CTRL_OFLWTHRES(val)	(((val) & 0x1f) << 24)
> -#define TEGRA186_ADMA_CH_FIFO_CTRL_STRVTHRES(val)	(((val) & 0x1f) << 16)
>  #define TEGRA186_ADMA_CH_FIFO_CTRL_TXSIZE(val)		(((val) & 0x1f) << 8)
>  #define TEGRA186_ADMA_CH_FIFO_CTRL_RXSIZE(val)		((val) & 0x1f)
>  
> @@ -64,14 +60,10 @@
>  
>  #define TEGRA_ADMA_BURST_COMPLETE_TIME			20
>  
> -#define TEGRA210_FIFO_CTRL_DEFAULT (TEGRA210_ADMA_CH_FIFO_CTRL_OFLWTHRES(1) | \
> -				    TEGRA210_ADMA_CH_FIFO_CTRL_STRVTHRES(1) | \
> -				    TEGRA210_ADMA_CH_FIFO_CTRL_TXSIZE(3)    | \
> +#define TEGRA210_FIFO_CTRL_DEFAULT (TEGRA210_ADMA_CH_FIFO_CTRL_TXSIZE(3) | \
>  				    TEGRA210_ADMA_CH_FIFO_CTRL_RXSIZE(3))
>  
> -#define TEGRA186_FIFO_CTRL_DEFAULT (TEGRA186_ADMA_CH_FIFO_CTRL_OFLWTHRES(1) | \
> -				    TEGRA186_ADMA_CH_FIFO_CTRL_STRVTHRES(1) | \
> -				    TEGRA186_ADMA_CH_FIFO_CTRL_TXSIZE(3)    | \
> +#define TEGRA186_FIFO_CTRL_DEFAULT (TEGRA186_ADMA_CH_FIFO_CTRL_TXSIZE(3) | \
>  				    TEGRA186_ADMA_CH_FIFO_CTRL_RXSIZE(3))
>  
>  #define ADMA_CH_REG_FIELD_VAL(val, mask, shift)	(((val) & mask) << shift)
> -- 
> 2.17.1

-- 
~Vinod



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux