Re: [PATCH] dmaengine: tegra210-adma: Don't program FIFO threshold

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 20-06-19, 08:54, Jon Hunter wrote:
> From: Jonathan Hunter <jonathanh@xxxxxxxxxx>
> 
> The Tegra210 ADMA supports two modes for transferring data to a FIFO
> which are ...
> 
> 1. Transfer data to/from the FIFO as soon as a single burst can be
>    transferred.
> 2. Transfer data to/from the FIFO based upon FIFO thresholds, where
>    the FIFO threshold is specified in terms on multiple bursts.
> 
> Currently, the ADMA driver programs the FIFO threshold values in the
> FIFO_CTRL register, but never enables the transfer mode that uses
> these threshold values. Given that these have never been used so far,
> simplify the ADMA driver by removing the programming of these threshold
> values.

This fails to apply for me, please rebase and send

-- 
~Vinod



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux