Re: [PATCH] dmaengine: ti: omap-dma: Improved memcpy polling support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18-06-19, 16:24, Peter Ujfalusi wrote:
> When a DMA client driver does not set the DMA_PREP_INTERRUPT because it
> does not want to use interrupts for DMA completion or because it can not
> rely on DMA interrupts due to executing the memcpy when interrupts are
> disabled it will poll the status of the transfer.
> 
> If the interrupts are enabled then the cookie will be set completed in the
> interrupt handler so only check in HW completion when the polling is really
> needed.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> ---
> Hi,
> 
> This patch fine-tunes the omap-dma polled memcpy support to be inline with how
> the EDMA driver is handling it.
> 
> The polled completion can be tested by applying:
> https://patchwork.kernel.org/patch/10966499/
> 
> and run the dmatest with polled = 1 on boards where sDMA is used.
> 
> Or boot up any dra7 family device with display enabled. The workaround for DMM
> errata i878 uses polled DMA memcpy.
> 
> Regards,
> Peter
> 
>  drivers/dma/ti/omap-dma.c | 37 ++++++++++++++++++++++++-------------
>  1 file changed, 24 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c
> index 5ba7d8485026..75d8f7e13c8d 100644
> --- a/drivers/dma/ti/omap-dma.c
> +++ b/drivers/dma/ti/omap-dma.c
> @@ -94,6 +94,7 @@ struct omap_desc {
>  	bool using_ll;
>  	enum dma_transfer_direction dir;
>  	dma_addr_t dev_addr;
> +	bool polled;
>  
>  	int32_t fi;		/* for OMAP_DMA_SYNC_PACKET / double indexing */
>  	int16_t ei;		/* for double indexing */
> @@ -834,20 +835,10 @@ static enum dma_status omap_dma_tx_status(struct dma_chan *chan,
>  
>  	ret = dma_cookie_status(chan, cookie, txstate);
>  
> -	if (!c->paused && c->running) {
> -		uint32_t ccr = omap_dma_chan_read(c, CCR);
> -		/*
> -		 * The channel is no longer active, set the return value
> -		 * accordingly
> -		 */
> -		if (!(ccr & CCR_ENABLE))
> -			ret = DMA_COMPLETE;
> -	}
> -
> +	spin_lock_irqsave(&c->vc.lock, flags);
>  	if (ret == DMA_COMPLETE || !txstate)
> -		return ret;
> +		goto out;
>  
> -	spin_lock_irqsave(&c->vc.lock, flags);
>  	vd = vchan_find_desc(&c->vc, cookie);
>  	if (vd) {
>  		txstate->residue = omap_dma_desc_size(to_omap_dma_desc(&vd->tx));
> @@ -868,6 +859,23 @@ static enum dma_status omap_dma_tx_status(struct dma_chan *chan,
>  	}
>  	if (ret == DMA_IN_PROGRESS && c->paused)
>  		ret = DMA_PAUSED;
> +
> +out:
> +	if (ret == DMA_IN_PROGRESS && c->running && c->desc &&
> +	    c->desc->polled && c->desc->vd.tx.cookie == cookie) {

heh, that makes quite a read!

checking DMA_IN_PROGRESS should not make sense, as we should bail out at
the start if it is completed

I think other can be optimzed to make it a better read!

> +		uint32_t ccr = omap_dma_chan_read(c, CCR);
> +		/*
> +		 * The channel is no longer active, set the return value
> +		 * accordingly
> +		 */
> +		if (!(ccr & CCR_ENABLE)) {
> +			struct omap_desc *d = c->desc;
> +			ret = DMA_COMPLETE;
> +			omap_dma_start_desc(c);
> +			vchan_cookie_complete(&d->vd);
> +		}
> +	}
> +
>  	spin_unlock_irqrestore(&c->vc.lock, flags);
>  
>  	return ret;
> @@ -1233,7 +1241,10 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_memcpy(
>  	d->ccr = c->ccr;
>  	d->ccr |= CCR_DST_AMODE_POSTINC | CCR_SRC_AMODE_POSTINC;
>  
> -	d->cicr = CICR_DROP_IE | CICR_FRAME_IE;
> +	if (tx_flags & DMA_PREP_INTERRUPT)
> +		d->cicr |= CICR_FRAME_IE;
> +	else
> +		d->polled = true;
>  
>  	d->csdp = data_type;
>  
> -- 
> Peter
> 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

-- 
~Vinod



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux