When a DMA client driver does not set the DMA_PREP_INTERRUPT because it
does not want to use interrupts for DMA completion or because it can not
rely on DMA interrupts due to executing the memcpy when interrupts are
disabled it will poll the status of the transfer.
Since we can not tell from any EDMA register that the transfer is
completed, we can only know that the paRAM set has been sent to TPTC for
processing we need to check the residue of the transfer, if it is 0 then
the transfer is completed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
---
drivers/dma/ti/edma.c | 37 +++++++++++++++++++++++++++++++++----
1 file changed, 33 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index 48b155cab822..87d7fdaa204b 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -171,6 +171,7 @@ struct edma_desc {
struct list_head node;
enum dma_transfer_direction direction;
int cyclic;
+ bool polled;
int absync;
int pset_nr;
struct edma_chan *echan;
@@ -1240,8 +1241,9 @@ static struct dma_async_tx_descriptor *edma_prep_dma_memcpy(
edesc->pset[0].param.opt |= ITCCHEN;
if (nslots == 1) {
- /* Enable transfer complete interrupt */
- edesc->pset[0].param.opt |= TCINTEN;
+ /* Enable transfer complete interrupt if requested */
+ if (tx_flags & DMA_PREP_INTERRUPT)
+ edesc->pset[0].param.opt |= TCINTEN;
} else {
/* Enable transfer complete chaining for the first slot */
edesc->pset[0].param.opt |= TCCHEN;
@@ -1268,9 +1270,14 @@ static struct dma_async_tx_descriptor *edma_prep_dma_memcpy(
}
edesc->pset[1].param.opt |= ITCCHEN;
- edesc->pset[1].param.opt |= TCINTEN;
+ /* Enable transfer complete interrupt if requested */
+ if (tx_flags & DMA_PREP_INTERRUPT)
+ edesc->pset[1].param.opt |= TCINTEN;
}
+ if (!(tx_flags & DMA_PREP_INTERRUPT))
+ edesc->polled = true;
+
return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
}
@@ -1840,18 +1847,40 @@ static enum dma_status edma_tx_status(struct dma_chan *chan,
{
struct edma_chan *echan = to_edma_chan(chan);
struct virt_dma_desc *vdesc;
+ struct dma_tx_state txstate_tmp;
enum dma_status ret;
unsigned long flags;
ret = dma_cookie_status(chan, cookie, txstate);
- if (ret == DMA_COMPLETE || !txstate)
+
+ /* Provide a dummy dma_tx_state for completion checking */
+ if (ret != DMA_COMPLETE && !txstate)
+ txstate = &txstate_tmp;
+
+ if (ret == DMA_COMPLETE)
return ret;
+ txstate->residue = 0;
spin_lock_irqsave(&echan->vchan.lock, flags);
if (echan->edesc && echan->edesc->vdesc.tx.cookie == cookie)
txstate->residue = edma_residue(echan->edesc);
else if ((vdesc = vchan_find_desc(&echan->vchan, cookie)))
txstate->residue = to_edma_desc(&vdesc->tx)->residue;
+
+ /*
+ * Mark the cookie completed if the residue is 0 for non cyclic
+ * transfers
+ */
+ if (ret != DMA_COMPLETE && !txstate->residue &&
+ echan->edesc && echan->edesc->polled &&
+ echan->edesc->vdesc.tx.cookie == cookie) {
+ edma_stop(echan);
+ vchan_cookie_complete(&echan->edesc->vdesc);
+ echan->edesc = NULL;
+ edma_execute(echan);
+ ret = DMA_COMPLETE;
+ }
+
spin_unlock_irqrestore(&echan->vchan.lock, flags);
return ret;
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
