On Mon, May 06, 2019 at 03:34:50PM +0300, Peter Ujfalusi wrote:
> Split patch for review containing: defines, structs, io and low level
> functions and interrupt callbacks.
Not a useful comment for upstream.
>
> DMA driver for
> Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P)
>
> The UDMA-P is intended to perform similar (but significantly upgraded) functions
> as the packet-oriented DMA used on previous SoC devices. The UDMA-P module
> supports the transmission and reception of various packet types. The UDMA-P is
> architected to facilitate the segmentation and reassembly of SoC DMA data
> structure compliant packets to/from smaller data blocks that are natively
> compatible with the specific requirements of each connected peripheral. Multiple
> Tx and Rx channels are provided within the DMA which allow multiple segmentation
> or reassembly operations to be ongoing. The DMA controller maintains state
> information for each of the channels which allows packet segmentation and
> reassembly operations to be time division multiplexed between channels in order
> to share the underlying DMA hardware. An external DMA scheduler is used to
> control the ordering and rate at which this multiplexing occurs for Transmit
> operations. The ordering and rate of Receive operations is indirectly controlled
> by the order in which blocks are pushed into the DMA on the Rx PSI-L interface.
>
> The UDMA-P also supports acting as both a UTC and UDMA-C for its internal
> channels. Channels in the UDMA-P can be configured to be either Packet-Based or
> Third-Party channels on a channel by channel basis.
>
> The initial driver supports:
> - MEM_TO_MEM (TR mode)
> - DEV_TO_MEM (Packet / TR mode)
> - MEM_TO_DEV (Packet / TR mode)
> - Cyclic (Packet / TR mode)
> - Metadata for descriptors
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> ---
> drivers/dma/ti/k3-udma.c | 1008 +++++++++++++++++++++++++++++
> drivers/dma/ti/k3-udma.h | 129 ++++
> include/dt-bindings/dma/k3-udma.h | 26 +
This belongs in the binding patch.
> 3 files changed, 1163 insertions(+)
> create mode 100644 drivers/dma/ti/k3-udma.c
> create mode 100644 drivers/dma/ti/k3-udma.h
> create mode 100644 include/dt-bindings/dma/k3-udma.h
> diff --git a/include/dt-bindings/dma/k3-udma.h b/include/dt-bindings/dma/k3-udma.h
> new file mode 100644
> index 000000000000..89ba6a9d4a8f
> --- /dev/null
> +++ b/include/dt-bindings/dma/k3-udma.h
> @@ -0,0 +1,26 @@
> +#ifndef __DT_TI_UDMA_H
> +#define __DT_TI_UDMA_H
> +
> +#define UDMA_TR_MODE 0
> +#define UDMA_PKT_MODE 1
> +
> +#define UDMA_DIR_TX 0
> +#define UDMA_DIR_RX 1
> +
> +#define PSIL_STATIC_TR_NONE 0
> +#define PSIL_STATIC_TR_XY 1
> +#define PSIL_STATIC_TR_MCAN 2
> +
> +#define UDMA_PDMA_TR_XY(id) \
> + ti,psil-config##id { \
> + linux,udma-mode = <UDMA_TR_MODE>; \
> + statictr-type = <PSIL_STATIC_TR_XY>; \
> + }
We don't accept this kind of complex macros in dts files. It obfuscates
reading dts files.
Rob
