Hi,
I tried applying this patch, and it conflicts.
There's also a minor issue that sohuld be fixed
On Mon, May 27, 2019 at 10:14:58PM +0200, Clément Péron wrote:
> From: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
>
> H6 has DMA controller which supports 16 channels.
>
> Add a node for it.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> index 16c5c3d0fd81..f4ea596c82ce 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -208,6 +208,18 @@
> reg = <0x03006000 0x400>;
> };
>
> + dma: dma-controller@3002000 {
> + compatible = "allwinner,sun50i-h6-dma";
> + reg = <0x03002000 0x1000>;
> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
> + clock-names = "bus", "mbus";
> + dma-channels = <16>;
> + dma-requests = <46>;
> + resets = <&ccu RST_BUS_DMA>;
> + #dma-cells = <1>;
> + };
> +
> pio: pinctrl@300b000 {
> compatible = "allwinner,sun50i-h6-pinctrl";
> reg = <0x0300b000 0x400>;
DT nodes are ordered by increasing physical addresses, so this node
shouldn't be there.
Thanks!
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
