Re: [PATCH] [RFC] dmaengine: add fifo_size member

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/06/2019 16:18, Dmitry Osipenko wrote:

...

>>> If I understood everything correctly, the FIFO buffer is shared among
>>> all of the ADMA clients and hence it should be up to the ADMA driver to
>>> manage the quotas of the clients. So if there is only one client that
>>> uses ADMA at a time, then this client will get a whole FIFO buffer, but
>>> once another client starts to use ADMA, then the ADMA driver will have
>>> to reconfigure hardware to split the quotas.
>>
>> The FIFO quotas are managed by the ADMAIF driver (does not exist in
>> mainline currently but we are working to upstream this) because it is
>> this device that owns and needs to configure the FIFOs. So it is really
>> a means to pass the information from the ADMAIF to the ADMA.
> 
> So you'd want to reserve a larger FIFO for an audio channel that has a
> higher audio rate since it will perform reads more often. You could also
> prioritize one channel over the others, like in a case of audio call for
> example.
> 
> Is the shared buffer smaller than may be needed by clients in a worst
> case scenario? If you could split the quotas statically such that each
> client won't ever starve, then seems there is no much need in the
> dynamic configuration.

Actually, this is still very much relevant for the static case. Even if
we defined a static configuration of the FIFO mapping in the ADMAIF
driver we still need to pass this information to the ADMA. I don't
really like the idea of having it statically defined in two different
drivers.

Jon

-- 
nvpublic



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux