Re: [PATCH v2 6/7] dmaengine: fsl-edma: add i.mx7ulp edma2 version support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 27, 2019 at 04:51:17PM +0800, yibin.gong@xxxxxxx wrote:
> From: Robin Gong <yibin.gong@xxxxxxx>
> 
> +static const struct of_device_id fsl_edma_dt_ids[] = {
> +	{ .compatible = "fsl,vf610-edma", .data = (void *)v1 },
> +	{ .compatible = "fsl,imx7ulp-edma", .data = (void *)v3 },
> +	{ /* sentinel */ }

Please put a struct type behind the .data pointer so that you can
configure...

> +};
> +MODULE_DEVICE_TABLE(of, fsl_edma_dt_ids);
> +
> @@ -218,6 +272,22 @@ static int fsl_edma_probe(struct platform_device *pdev)
>  	fsl_edma_setup_regs(fsl_edma);
>  	regs = &fsl_edma->regs;
>  
> +	if (fsl_edma->version == v3) {
> +		fsl_edma->dmamux_nr = 1;

...things like this...

> @@ -264,7 +334,11 @@ static int fsl_edma_probe(struct platform_device *pdev)
>  	}
>  
>  	edma_writel(fsl_edma, ~0, regs->intl);
> -	ret = fsl_edma_irq_init(pdev, fsl_edma);
> +
> +	if (fsl_edma->version == v3)
> +		ret = fsl_edma2_irq_init(pdev, fsl_edma);
> +	else
> +		ret = fsl_edma_irq_init(pdev, fsl_edma);

...and this one in that struct rather than littering the code more and
more with such version tests.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux