[PATCH v2 6/6] dmaengine: sprd: Add interrupt support for 2-stage transfer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For 2-stage transfer, some users like Audio still need transaction interrupt
to notify when the 2-stage transfer is completed. Thus we should enable
2-stage transfer interrupt to support this feature.

Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
---
 drivers/dma/sprd-dma.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 01abed5..baac476 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -62,6 +62,8 @@
 /* SPRD_DMA_GLB_2STAGE_GRP register definition */
 #define SPRD_DMA_GLB_2STAGE_EN		BIT(24)
 #define SPRD_DMA_GLB_CHN_INT_MASK	GENMASK(23, 20)
+#define SPRD_DMA_GLB_DEST_INT		BIT(22)
+#define SPRD_DMA_GLB_SRC_INT		BIT(20)
 #define SPRD_DMA_GLB_LIST_DONE_TRG	BIT(19)
 #define SPRD_DMA_GLB_TRANS_DONE_TRG	BIT(18)
 #define SPRD_DMA_GLB_BLOCK_DONE_TRG	BIT(17)
@@ -135,6 +137,7 @@
 /* define DMA channel mode & trigger mode mask */
 #define SPRD_DMA_CHN_MODE_MASK		GENMASK(7, 0)
 #define SPRD_DMA_TRG_MODE_MASK		GENMASK(7, 0)
+#define SPRD_DMA_INT_TYPE_MASK		GENMASK(7, 0)
 
 /* define the DMA transfer step type */
 #define SPRD_DMA_NONE_STEP		0
@@ -190,6 +193,7 @@ struct sprd_dma_chn {
 	u32			dev_id;
 	enum sprd_dma_chn_mode	chn_mode;
 	enum sprd_dma_trg_mode	trg_mode;
+	enum sprd_dma_int_type	int_type;
 	struct sprd_dma_desc	*cur_desc;
 };
 
@@ -429,6 +433,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
 		val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
 		val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
 		val |= SPRD_DMA_GLB_2STAGE_EN;
+		if (schan->int_type != SPRD_DMA_NO_INT)
+			val |= SPRD_DMA_GLB_SRC_INT;
+
 		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
 		break;
 
@@ -436,6 +443,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
 		val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
 		val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
 		val |= SPRD_DMA_GLB_2STAGE_EN;
+		if (schan->int_type != SPRD_DMA_NO_INT)
+			val |= SPRD_DMA_GLB_SRC_INT;
+
 		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
 		break;
 
@@ -443,6 +453,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
 		val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
 			SPRD_DMA_GLB_DEST_CHN_MASK;
 		val |= SPRD_DMA_GLB_2STAGE_EN;
+		if (schan->int_type != SPRD_DMA_NO_INT)
+			val |= SPRD_DMA_GLB_DEST_INT;
+
 		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
 		break;
 
@@ -450,6 +463,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
 		val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
 			SPRD_DMA_GLB_DEST_CHN_MASK;
 		val |= SPRD_DMA_GLB_2STAGE_EN;
+		if (schan->int_type != SPRD_DMA_NO_INT)
+			val |= SPRD_DMA_GLB_DEST_INT;
+
 		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
 		break;
 
@@ -911,11 +927,15 @@ static int sprd_dma_fill_linklist_desc(struct dma_chan *chan,
 		schan->linklist.virt_addr = 0;
 	}
 
-	/* Set channel mode and trigger mode for 2-stage transfer */
+	/*
+	 * Set channel mode, interrupt mode and trigger mode for 2-stage
+	 * transfer.
+	 */
 	schan->chn_mode =
 		(flags >> SPRD_DMA_CHN_MODE_SHIFT) & SPRD_DMA_CHN_MODE_MASK;
 	schan->trg_mode =
 		(flags >> SPRD_DMA_TRG_MODE_SHIFT) & SPRD_DMA_TRG_MODE_MASK;
+	schan->int_type = flags & SPRD_DMA_INT_TYPE_MASK;
 
 	sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
 	if (!sdesc)
-- 
1.7.9.5




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux