Re: Issues with i.MX SPI DMA transfers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Uwe,


Hello Igor,

On Wed, Mar 27, 2019 at 08:40:00PM +0300, Igor Plyatov wrote:
please, help to resolve two issues with SPI DMA transfers at i.MX6Q
platform.

First issue is
  [ 4465.008003] spi_master spi0: I/O Error in DMA RX

Second issue is duplication for one of received bytes.

Probably, these issues related to each one.
This is probably the same problem I hit some time ago. Check ERR009165
in the errata. You either need to disable DMA or need a fixed
sdma-Script.

disabling of DMA is not an option, because high throughput required for SPI bus to communicate with DSPs.

I'm aware of ERR009165, but as I write some minutes earlier to list, spi0 (alias for ecspi1) and spi1 (alias for ecspi2) work flawless, while spi4 (alias for ecspi5) fails very fast.

Does same SDMA script used for all SPI interfaces or scripts are different?

Best wishes.

--

Igor Plyatov




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux