On 15-03-19, 03:49, Katsuhiro Suzuki wrote:
> This patch adds debugfs interface to show the relationship between
> DMA threads (hardware resource for transferring data) and DMA
> channel ID of DMA slave.
>
> Typically, PL330 has many slaves than number of DMA threads.
> So sometimes PL330 cannot allocate DMA threads for all slaves even
> if an user specify DMA channel ID in devicetree. This interface will
a user :)
> be useful for checking that DMA threads are allocated or not.
>
> Below is an output sample:
>
> $ sudo cat /sys/kernel/debug/ff1f0000.dmac
> PL330 physical channels:
> THREAD: CHANNEL:
> -------- -----
> 0 8
> 1 9
> 2 11
> 3 12
> 4 14
> 5 15
> 6 10
> 7 --
>
> Signed-off-by: Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx>
> ---
> drivers/dma/pl330.c | 51 +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> index eec79fdf27a5..aab71863757c 100644
> --- a/drivers/dma/pl330.c
> +++ b/drivers/dma/pl330.c
> @@ -11,6 +11,7 @@
> * (at your option) any later version.
> */
>
> +#include <linux/debugfs.h>
> #include <linux/kernel.h>
> #include <linux/io.h>
> #include <linux/init.h>
> @@ -2896,6 +2897,55 @@ static irqreturn_t pl330_irq_handler(int irq, void *data)
> BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
> BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
>
> +#ifdef CONFIG_DEBUG_FS
> +static int pl330_debugfs_show(struct seq_file *s, void *data)
> +{
> + struct pl330_dmac *pl330 = s->private;
> + int chans, pchs, ch, pr, found;
> +
> + chans = pl330->pcfg.num_chan;
> + pchs = pl330->num_peripherals;
> +
> + seq_puts(s, "PL330 physical channels:\n");
> + seq_puts(s, "THREAD:\t\tCHANNEL:\n");
> + seq_puts(s, "--------\t-----\n");
> + for (ch = 0; ch < chans; ch++) {
> + struct pl330_thread *thrd = &pl330->channels[ch];
> +
> + found = -1;
found can be uninitialized if we skip this for, which should not be an
issue as chans> 0!
> + for (pr = 0; pr < pchs; pr++) {
> + struct dma_pl330_chan *pch = &pl330->peripherals[pr];
> +
> + if (!pch->thread || thrd->id != pch->thread->id)
> + continue;
> +
> + found = pr;
> + }
> +
> + seq_printf(s, "%d\t\t", thrd->id);
> + if (found == -1)
> + seq_puts(s, "--\n");
> + else
> + seq_printf(s, "%d\n", found);
> + }
> +
> + return 0;
> +}
> +
> +DEFINE_SHOW_ATTRIBUTE(pl330_debugfs);
> +
> +static inline void init_pl330_debugfs(struct pl330_dmac *pl330)
> +{
> + debugfs_create_file(dev_name(pl330->ddma.dev),
> + S_IFREG | S_IRUGO, NULL, pl330,
are we not supposed to use octal permissions?
> + &pl330_debugfs_fops);
> +}
> +#else
> +static inline void init_pl330_debugfs(struct pl330_dmac *pl330)
> +{
> +}
> +#endif
> +
> /*
> * Runtime PM callbacks are provided by amba/bus.c driver.
> *
> @@ -3082,6 +3132,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
> dev_err(&adev->dev, "unable to set the seg size\n");
>
>
> + init_pl330_debugfs(pl330);
> dev_info(&adev->dev,
> "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
> dev_info(&adev->dev,
> --
> 2.20.1
--
~Vinod
