The width of the "length register" cannot be autodetected, and it is now
specified with a DT property. Add documentation for it.
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxxxxx>
Signed-off-by: Andrea Merello <andrea.merello@xxxxxxxxx>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxxxxx>
---
Changes in v2:
- change property name
- property is now optional
- cc DT maintainer
Changes in v3:
- reword
- cc DT maintainerS and ML
Changes in v4:
- specify the unit, the valid range and the default value
Changes in v5:
- commit message trivial fix
- fix spaces before tab
Changes in v6:
None
---
Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index 174af2c45e77..2fce9fb4b270 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -41,6 +41,10 @@ Optional properties:
- xlnx,include-sg: Tells configured for Scatter-mode in
the hardware.
Optional properties for AXI DMA:
+- xlnx,sg-length-width: Should be set to the width in bits of the length
+ register as configured in h/w. Takes values {8...26}. If the property
+ is missing or invalid then the default value 23 is used. This is the
+ maximum value that is supported by all IP versions.
- xlnx,mcdma: Tells whether configured for multi-channel mode in the hardware.
Optional properties for VDMA:
- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
--
2.17.1
