Re: [PATCH v3 1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pierre,

On 09-10-18, 09:18, Pierre Yves MORDRET wrote:

> >>  * DMA client
> >> @@ -68,7 +84,16 @@ channel: a phandle to the DMA controller plus the following four integer cells:
> >>  	0x1: 1/2 full FIFO
> >>  	0x2: 3/4 full FIFO
> >>  	0x3: full FIFO
> >> -
> >> + -bit 2: Intermediate M2M transfer from/to DDR to/from SRAM throughout MDMA
> >> +	0: MDMA not used to generate an intermediate M2M transfer
> >> +	1: MDMA used to generate an intermediate M2M transfer.
> >> + -bit 3-4: indicated SRAM Buffer size in (2^order)*PAGE_SIZE.
> >> +	PAGE_SIZE is given by Linux at 4KiB: include/asm-generic/page.h.
> >> +	Order is given by those 2 bits starting at 0.
> >> +	Valid only whether Intermediate M2M transfer is set.
> > 
> > why do we need this as a property?
> 
> In some UC, we need more than 4KiB in case of chaining for better performances.
> Chaining has to be enabled by client if performance is at sacks.

Okay if that is the case why is the user not taking care of this?
Creating DMA txn and chaining them up and starting the chain? Why would
dmaengine driver need to do that?

-- 
~Vinod



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux