On 28-09-18, 15:01, Pierre-Yves MORDRET wrote: > From: M'boumba Cedric Madianga <cedric.madianga@xxxxxxxxx> > > This patch adds the description of the 2 properties needed to support M2M > transfer triggered by STM32 DMA when his transfer is complete. > > Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx> > --- > Version history: > v3: > v2: > * rework content > v1: > * Initial > --- > --- > Documentation/devicetree/bindings/dma/stm32-mdma.txt | 12 ++++++++---- > 1 file changed, 8 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/dma/stm32-mdma.txt b/Documentation/devicetree/bindings/dma/stm32-mdma.txt > index d18772d..27c2812 100644 > --- a/Documentation/devicetree/bindings/dma/stm32-mdma.txt > +++ b/Documentation/devicetree/bindings/dma/stm32-mdma.txt > @@ -10,7 +10,7 @@ Required properties: > - interrupts: Should contain the MDMA interrupt. > - clocks: Should contain the input clock of the DMA instance. > - resets: Reference to a reset controller asserting the DMA controller. > -- #dma-cells : Must be <5>. See DMA client paragraph for more details. > +- #dma-cells : Must be <6>. See DMA client paragraph for more details. can you update the example for 6 cells? Also what happens to dts using 5 cells.. > > Optional properties: > - dma-channels: Number of DMA channels supported by the controller. > @@ -26,7 +26,7 @@ Example: > interrupts = <122>; > clocks = <&timer_clk>; > resets = <&rcc 992>; > - #dma-cells = <5>; > + #dma-cells = <6>; > dma-channels = <16>; > dma-requests = <32>; > st,ahb-addr-masks = <0x20000000>, <0x00000000>; > @@ -35,8 +35,8 @@ Example: > * DMA client > > DMA clients connected to the STM32 MDMA controller must use the format > -described in the dma.txt file, using a five-cell specifier for each channel: > -a phandle to the MDMA controller plus the following five integer cells: > +described in the dma.txt file, using a six-cell specifier for each channel: > +a phandle to the MDMA controller plus the following six integer cells: > > 1. The request line number > 2. The priority level > @@ -76,6 +76,10 @@ a phandle to the MDMA controller plus the following five integer cells: > if no HW ack signal is used by the MDMA client > 5. A 32bit mask specifying the value to be written to acknowledge the request > if no HW ack signal is used by the MDMA client > +6. A bitfield value specifying if the MDMA client wants to generate M2M > + transfer with HW trigger (1) or not (0). This bitfield should be only > + enabled for M2M transfer triggered by STM32 DMA client. The memory devices > + involved in this kind of transfer are SRAM and DDR. > > Example: > > -- > 2.7.4 -- ~Vinod
