(+CC Rob, DT, LKML)
I forgot to CC this to DT community...
2018-08-21 18:30 GMT+09:00 Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>:
> The MIO DMAC (Media IO DMA Controller) is used in UniPhier LD4,
> Pro4, and sLD8 SoCs.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
> ---
>
> .../devicetree/bindings/dma/uniphier-mio-dmac.txt | 28 ++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
>
> diff --git a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
> new file mode 100644
> index 0000000..a9e969e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
> @@ -0,0 +1,28 @@
> +UniPhier Media IO DMA controller
> +
> +This works as an external DMA engine for SD/eMMC controllers etc.
> +found in UniPhier LD4, Pro4, sLD8 SoCs.
> +
> +Required properties:
> +- compatible: should be "socionext,uniphier-mio-dmac".
> +- reg: offset and length of the register set for the device.
> +- interrupts: a list of interrupt specifiers associated with the DMA channels.
> +- clocks: a single clock specifier
> +- #dma-cells: should be <1>. The single cell represents the channel number.
> +- dma-channels: specify the number of the DMA channels. This should match to
> + the number of tuples in the interrupts property.
> +
> +Example:
> + dmac: dmac@5a000000 {
> + compatible = "socionext,uniphier-mio-dmac";
> + reg = <0x5a000000 0x1000>;
> + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
> + <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
> + clocks = <&mio_clk 7>;
> + #dma-cells = <1>;
> + dma-channels = <8>;
> + };
> +
> +Note:
> +In the example above, "interrupts = <0 68 4>, <0 68 4>, ..." is not a typo.
> +The first two channels share a single interrupt line.
> --
> 2.7.4
>
--
Best Regards
Masahiro Yamada
