Hi Krzysztof, On Mon, Aug 06, 2018 at 09:43:42AM +0200, Krzysztof Kozlowski wrote: > On 3 August 2018 at 21:32, Angelo Dureghello <angelo@xxxxxxxx> wrote: > > This patch adds a new fsl-edma-common module to allow new > > mcf-edma module code to use most of the fsl-edma code. > > > > Signed-off-by: Angelo Dureghello <angelo@xxxxxxxx> > > --- > > Changes for v2: > > - patch splitted into 4 > > - add mcf-edma as minimal different parts from fsl-edma > > > > Changes for v3: > > none > > > > Changes for v4: > > - patch simplified from 4/4 into 2/2 > > - collecting all the mcf-edma-related changes > > > > Changes for v5: > > none > > > > Changes for v6: > > - adjusted comment header > > - fixed bit shift with BIT() > > - we need to free the interrupts at remove(), so removed all devm_ > > interrupt related calls > > > > Changes for v7: > > none > > > > Changes for v8: > > - patch rewritten from scratch, splitted into 3, common code isolated, > > minimal changes from the original Freescale code have been done. > > The patch has been tested with both Iris + Colibri Vybrid VF50 and > > stmark2/mcf54415 Coldfire boards. > > --- > > drivers/dma/Makefile | 2 +- > > drivers/dma/fsl-edma-common.c | 576 ++++++++++++++++++++++++++++ > > drivers/dma/fsl-edma-common.h | 196 ++++++++++ > > drivers/dma/fsl-edma.c | 697 +--------------------------------- > > 4 files changed, 774 insertions(+), 697 deletions(-) > > create mode 100644 drivers/dma/fsl-edma-common.c > > create mode 100644 drivers/dma/fsl-edma-common.h > > > > diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile > > index 203a99d68315..66022f59fca4 100644 > > --- a/drivers/dma/Makefile > > +++ b/drivers/dma/Makefile > > @@ -31,7 +31,7 @@ obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/ > > obj-$(CONFIG_DW_DMAC_CORE) += dw/ > > obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o > > obj-$(CONFIG_FSL_DMA) += fsldma.o > > -obj-$(CONFIG_FSL_EDMA) += fsl-edma.o > > +obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o > > obj-$(CONFIG_FSL_RAID) += fsl_raid.o > > obj-$(CONFIG_HSU_DMA) += hsu/ > > obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o > > diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c > > new file mode 100644 > > index 000000000000..0ae7094f477a > > --- /dev/null > > +++ b/drivers/dma/fsl-edma-common.c > > @@ -0,0 +1,576 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > You moved code from fsl-edma.c which is licensed on GPL-2.0+. I think > that's not allowed as you effectively relicense the work on new > license. > Ok, so if i undestrand, i should change that comment to // SPDX-License-Identifier: GPL-2.0+ Right ? > Tested-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> > > Best regards, > Krzysztof > Best regards, Angelo > > +// > > +// Copyright (c) 2013-2014 Freescale Semiconductor, Inc > > +// Copyright (c) 2017 Sysam, Angelo Dureghello <angelo@xxxxxxxx> > -- > To unsubscribe from this list: send the line "unsubscribe dmaengine" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
