Re: [PATCH 1/1] dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 24-07-18, 16:40, hannah@xxxxxxxxxxx wrote:
> From: Hanna Hawa <hannah@xxxxxxxxxxx>
> 
> >> drivers/dma/mv_xor_v2.c:647:36: sparse: constant 0xFFFF00000000 is so big it is long
>    include/linux/device.h:678:13: sparse: undefined identifier '__builtin_mul_overflow'
>    include/linux/device.h:678:13: sparse: call with no type!
> 
> Use lower_32_bits and upper_32_bits to set the hw_desq address, instead of
> using constant.

Applied after adding reported-by, thanks.

You should always give credit to error reports

-- 
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux