Re: [PATCH v3 01/18] doc: dt-bindings: jz4780-dma: Update bindings to reflect driver changes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jul 21, 2018 at 01:06:26PM +0200, Paul Cercueil wrote:
> The driver is now compatible with four SoCs: JZ4780, JZ4770, JZ4725B and
> JZ4740.

What the driver supports is irrelevant to the binding.
>
> Besides, it now expects the devicetree to supply a second memory
> resource. This resource is mandatory on the newly supported SoCs.
> For the JZ4780, new devicetree code must also provide it, although the
> driver is still compatible with older devicetree binaries.
> 
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/dma/jz4780-dma.txt | 14 ++++++++++----
>  1 file changed, 10 insertions(+), 4 deletions(-)
> 
>  v2: New patch in this series; regroups the changes made to the
>  jz4780-dma.txt doc file in the previous version of the patchset.
> 
>  v3: Updated example to comply with devicetree specification
> 
> diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
> index f25feee62b15..14f33305e194 100644
> --- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
> @@ -2,8 +2,13 @@
>  
>  Required properties:
>  
> -- compatible: Should be "ingenic,jz4780-dma"
> -- reg: Should contain the DMA controller registers location and length.
> +- compatible: Should be one of:
> +  * ingenic,jz4740-dma
> +  * ingenic,jz4725b-dma
> +  * ingenic,jz4770-dma
> +  * ingenic,jz4780-dma

So none of these are compatible with each other? It should be one valid 
combination per line.

> +- reg: Should contain the DMA channel registers location and length, followed
> +  by the DMA controller registers location and length.
>  - interrupts: Should contain the interrupt specifier of the DMA controller.
>  - interrupt-parent: Should be the phandle of the interrupt controller that
>  - clocks: Should contain a clock specifier for the JZ4780 PDMA clock.
> @@ -20,9 +25,10 @@ Optional properties:
>  
>  Example:
>  
> -dma: dma@13420000 {
> +dma: dma-controller@13420000 {
>  	compatible = "ingenic,jz4780-dma";
> -	reg = <0x13420000 0x10000>;
> +	reg = <0x13420000 0x400
> +	       0x13421000 0x40>;
>  
>  	interrupt-parent = <&intc>;
>  	interrupts = <10>;
> -- 
> 2.11.0
> 
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux