Hi Paul,
Hi Paul,
On Tue, Jul 03, 2018 at 02:32:02PM +0200, Paul Cercueil wrote:
@@ -804,9 +818,19 @@ static int jz4780_dma_probe(struct
platform_device *pdev)
return -EINVAL;
}
- jzdma->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(jzdma->base))
- return PTR_ERR(jzdma->base);
+ jzdma->chn_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(jzdma->chn_base))
+ return PTR_ERR(jzdma->chn_base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ dev_err(dev, "failed to get I/O memory\n");
+ return -EINVAL;
+ }
+
+ jzdma->ctrl_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(jzdma->ctrl_base))
+ return PTR_ERR(jzdma->ctrl_base);
Could we have this failure case fall back to the existing behaviour
where we only have a single resource covering all the registers? That
would avoid breaking bisection between this patch & the one that
updates
the JZ4780 DT.
For example:
#define JZ4780_DMA_CTRL_OFFSET 0x1000
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (res) {
jzdma->ctrl_base = devm_ioremap_resource(dev, res);
if (IS_ERR(jzdma->ctrl_base))
return PTR_ERR(jzdma->ctrl_base);
} else {
jzdma->ctrl_base = jzdma->chn_base + JZ4780_DMA_CTRL_OFFSET;
}
Then you could remove the fallback after patch 13, to end up with the
same code you have now but without breaking bisection.
Most correct might be to move patch 13 to right after this one, so
that
the JZ4780-specific fallback can be removed before adding support for
any of the other SoCs.
Sure, I can do that for the V2.
Thanks,
-Paul
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
