[PATCH] dmaengine: ioatdma: set the completion address register after channel reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It seems that starting with Skylake Xeon, channel reset clears the
completion address register. Make sure the completion address register is
set again after reset.

Signed-off-by: Dave Jiang <dave.jiang@xxxxxxxxx>
---
 drivers/dma/ioat/dma.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index 8b5b23a8ace9..71852751ef3c 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -688,6 +688,12 @@ static void ioat_restart_channel(struct ioatdma_chan *ioat_chan)
 {
 	u64 phys_complete;
 
+	/* set the completion address register again */
+	writel(((u64)ioat_chan->completion_dma) & 0x00000000FFFFFFFF,
+	       ioat_chan->reg_base + IOAT_CHANCMP_OFFSET_LOW);
+	writel(((u64)ioat_chan->completion_dma) >> 32,
+	       ioat_chan->reg_base + IOAT_CHANCMP_OFFSET_HIGH);
+
 	ioat_quiesce(ioat_chan, 0);
 	if (ioat_cleanup_preamble(ioat_chan, &phys_complete))
 		__cleanup(ioat_chan, phys_complete);

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux